Paper Validation Online Courses
Paper numerical validation seems imperative as the first step of any industrial and academic project and thesis. We can validate our solution method by comparing our CFD simulation results with the numerical and experimental data in published papers and articles. After we show that the CFD methods that we are applying are accurate, we can carry out more studies, investigations, and optimization on any specific project. So, the starting phase of any credit study should be Paper Validation. Learn more by watching this video
Price: $495
This product simulates a Twisted Beam using ANSYS Static Structural software. We model the 3D geometry using the DesignModeler software and mesh it with a Structured grid. This project has been implemented in Four Cases: no twist / with a 180-degree twist and lengths of 350 mm / 700 mm. We use Fixed Support and Force Load as the load boundary conditions. We represent a Paper Validation with a reference Article.
Data Center Thermal Performance CFD Simulation: Paper Validation
Intermediate, Advanced
Price: $225
Data Center CFD Simulation. HVAC and Airflow Management. Paper Validation.
Solar Chimney, Radiation Model, Paper Numerical Validation, ANSYS Fluent
Intermediate, Advanced
Price: $180
This project numerically simulates the Solar Chimney using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Discrete Ordinates (DO) Radiation Model to define the radiation heat transfer. We use the Solar Ray Tracing to define the solar irradiation. The present CFD work is Validated with a reference Article.
Cycloidal Rotor: 2D CFD Simulation of Geometrical Effects on Performance; Paper Validation
Intermediate
Price: $649
This project presents a three-dimensional transient CFD simulation of a four-blade cycloidal rotor using ANSYS Fluent with a moving mesh approach. The rotor uses NACA 0015 blades with prescribed pitching motion, and the flow is modeled with the SST k-omega turbulence model in an unstructured mesh domain. Aerodynamic loads, disk loading, and power loading are computed from the transient solution and compared with the article “Numerical Modelling of Geometrical Effects in the Performance of a Cycloidal Rotor.” The close agreement between the numerical results and the published data confirms the validity of the geometry, mesh, and solver settings used in this study.
Price: $499
This product numerically simulates a Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The battery pack is constructed of six batteries stacked in Series, called 1P6S. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. The present CFD work is Validated with a reference Article.
Price: $499
This product numerically simulates the Battery with PCM cover using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. We used the Solidification and Melting Model to define phase change material (PCM). The present CFD work is Validated with a reference Article.
Price: $379
This product numerically simulates a single Battery cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. The present CFD work is Validated with a reference Article.
Price: $689
This project numerically simulates the PEM Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software to generate a Structured mesh. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the PEMFC sub-model to define a proton-exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O. The present CFD work is Validated with a reference Article.
Price: $819
This project numerically simulates the PEM Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software to generate a Structured mesh. We used the Potential/Electrochemistry model to define the potential equations. We used the Electrolysis sub-model and PEM Electrolysis type to define the electrolysis process. We used the Species model to define H2, O2, and H2O. We used the Mixture Multiphase model to define water and species phases. The present CFD work is Validated with a reference Article.