Solidification & Melting (PCM) Online Courses
Here's every CFD online course related to Solidification & Melting (PCM) category.
Price: $42
The present CFD Project simulates PCM for Passive Ventilation via ANSYS Fluent software. We modeled the geometry using ANSYS Design modeler software and created the mesh using ANSYS meshing software. The meshing is structured, and the number of cells for the first and second models is 228448 and 241560, respectively. The solidification and Melting Model has been used to define PCMs. Incompressible Ideal Gas has been used to define density changes. The problem is dependent on time and unsteady.
PCM Components in Hot Water Tank Thermal Analysis (Load & Discharge), CFD Simulation Training
Beginner, Intermediate
Price: $36
In this project, PCM components in a hot water tank are simulated.
Bitumen Melting Inside a Tank, CFD Simulation ANSYS Fluent Training
Beginner, Intermediate
Price: $10
The present problem simulates bitumen melting inside a bitumen tank using ANSYS Fluent software.
Price: $20
The problem numerically simulates Sandwiched PCM between two concentric cylindrical tubes using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 360000. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.
Price: $39
The problem numerically simulates the battery cooling by applying phase change material in a storage tank using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. The present simulation is performed in two steps: without and with phase change material on both sides of the battery. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 93090 and 276660 for the first and the second cases, respectively. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.
Shell and Tube Heat Exchanger, PCM, Paper Validation
Intermediate
Price: $81
The problem numerically simulates the shell and tube heat exchanger as a PCM thermal storage system using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 169171. We define the Solidification and Melting model to define phase change material. We use a UDF to define the temperature-dependent viscosity. This simulation is validated with a reference article.
Price: $20
The problem numerically simulates the Solidification and Melting of PCM around a Corrugated Tube using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 115362. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.
Price: $48
The problem numerically simulates PCM Solar Collector using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 969866. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials. We use the Discrete Ordinate (DO) to define radiation heat transfer.
Air Conditioning with PCM CFD Simulation
Intermediate
Price: $24
The problem numerically simulates air conditioning with phase change materials (PCM) using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 45000. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.