UDF Online Courses

Price: $330

This problem simulates the HVAC of an operating room by ANSYS Fluent software. The geometry of the present model is drawn by Design Modeler software and then meshed by ANSYS Meshing software. It's a Structured mesh, and the cell number equals 938174. The VOF multiphase model is used for three phases: air, water vapor, and water fluid. Mass Transfer is applied to simulate Evaporation/Condensation. Also, a UDF file is used to determine the Surface Evaporation.

Price: $210

In this project, the heat conduction of a brake disk system is modeled and simulated.

Price: $120

The problem numerically simulates COVID-19 Patient TRANSIENT Breathing in Operating Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4354238. We perform this simulation as unsteady (Transient). We use the Species Transport Model to define oxygen, carbon dioxide, etc, for air conditioning applications. We use the Discrete Phase Model (DPM) to define particle injection from the patient's mouth. We use the UDF to define breathing flow rate.

Price: $30

The problem numerically simulates seawater flow around offshore pipelines using ANSYS Fluent software. We aim to investigate Drag and Lift in Two comparative cases. We design the 2-D model by the ICEM software. We Mesh the model by ICEM software. This mesh is Structured, and the element number equals 135417. We use two UDF to define wavy flow velocity and relative pressure due to wave motion. We perform this simulation as unsteady (Transient).

Price: $99

The problem numerically simulates the Rotational Motion of a Fin under the influence of Oscillatory Wave flow using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 120049. We perform this simulation as unsteady (Transient). We use the two-phase VOF model to define the flow field containing the water and air. We use Dynamics Mesh to define deformation of the grid around the moving wall. We determine only one degree of freedom (1-DOF) to rotate the fin. We use a UDF to define the reciprocating motion of the wall that causes the wavy flow.

Price: $240

The problem numerically simulates the surface evaporation of a falling water droplet using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 94800. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase Model to define droplets inside the air. We use a UDF to define surface evaporation as the Mass Transfer rate between water and air.

Price: $36

The problem numerically simulates Non-Newtonian Blood Pulse Flow in a Vein using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 397388. We perform this simulation as unsteady (Transient). We use a UDF to define the pulse of the blood flow. The Carreau Equation is used for viscosity definition to consider non-newtonian blood.

Price: $330

The problem numerically simulates the Solar Water Desalination using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 16000. We perform this simulation as unsteady (Transient). We use the Species Transport model to define 3 different species. We use a UDF to define mass transfer rate in the form of evaporation-condensation.

Price: $330

The present study investigates the performance of a solar-still thermal desalination unit.