UDF Online Courses

Price: $54

The problem numerically simulates the airflow around an airfoil using ANSYS Fluent software. This project is performed by the fluid-structure interaction (FSI) method. We design the 2-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 56220. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to consider grid changes over time. We apply the System Coupling to communicate between Fluent and Transient Structural software. We use the Density-based solver to consider compressible flow. We use a UDF to determine variable velocity and attack angle.

Price: $36

The problem numerically simulates the Darrieus Vertical Axis Water Turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 7422668. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define the change of meshing around the rotating turbine blades. We define a Rigid Body by a rotational motion with one degree of freedom (1-DOF).

Price: $99

The problem numerically simulates Self-Propelled Submarine Motion using ANSYS Fluent software. We design the 3-D model with the CATIA software. We Mesh the model with ICEM software, and the element number equals 2802219. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to define grid changes. We use a UDF to define the movement as a Rigid Body. We use the VOF Multi-phase model to consider water and air.

Price: $99

The problem numerically simulates the Submarine Movement in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 316846. We define the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the rotational movement. We define a rigid body by considering one degree of freedom. We use the VOF Multi-phase model to define water and air.

Price: $54

In this project, nanofluid flows in a solid aluminum channel in the presence of an applied magnetic field.

Price: $60

The problem numerically simulates the Floating Vessel Motion in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 902808. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the motion with two degrees of freedom. We use the VOF Multiphase model and the Open Channel condition to define the water level inside the air.

Price: $32

The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.

Price: $180

The problem numerically simulates the Mixing of Carbon Dioxide and Ethanol using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 73788. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define carbon dioxide and ethanol. We use a UDF to define time-dependent pressure at the model's inlet.

Price: $126

The problem numerically simulates Radiator Thermal Performance with Fans using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 4683472. This project is simulated and validated with a reference article. We use the Fan boundary condition and define a Pressure Jump. We use a UDF to define the temperature profile.