CFD Beginner Courses

Price: $40

This tutorial simulates cavitation on a boat propeller using ANSYS Fluent. It applies the Mixture multiphase model with the Schnerr-Sauer cavitation model and mesh motion for the rotating propeller, and examines how pressure distribution and rotational speed drive vapor formation on the blades.

Price: $100

The problem numerically simulates the rotation of Boat Propeller using ANSYS CFX software. The geometry is designed in a 3D model with the SpaceClaim software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 4,037,941. Frozen Rotor is set for frame change model of the interfaces.

Price: $60

The problem numerically simulates a Porous Zone inside 3D cylinder using ANSYS CFX software. We modeled the geometry using ANSYS Design Modeler and created the mesh using ANSYS Meshing software. The mesh type is Structured and the number of them is 1,308,762. Porosity has been used in the simulation. Pressure Drop inside the channel due to porosity is investigated.

Price: $80

The problem numerically simulates the Von Kármán effect behind a cylinder using ANSYS CFX software. The geometry is designed in a 2.5D model with the Design Modeler software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 77,262. Body of Influence option is used to create smaller elements around the cylinder. The Transient and Steady form of the solution is performed.

Price: $100

The problem numerically simulates the Pond Overflow using ANSYS CFX software. The geometry is designed in a 2.5D model with the Design Modeler software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 55,418. The homogeneous Multiphase model defines water and air beside Free Surface Model.

Price: $4

Discrete Phase Model Dialog Box: interaction, particle treatment, tracking Physical Models: DEM, Breakup, Coalescence, etc Injection Dialog box: injection type, particle type, diameter distribution, etc Drag Laws: spherical, non-spherical, stokes-cunningham, etc Breakup Models: TAB, Wave DPM Boundary Conditions: Trap, reflect, wall-film, etc

Price: $100

This problem simulates the Plate Heat Exchanger by ANSYS CFX software. The geometry of the present model is drawn by Design Modeler in 2.5D and then is meshed by ANSYS Meshing software. The cell number equals 5,096,686. Thermal Energy is enabled to capture the temperature. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).

Price: $120

Thermal Analysis in a storage tank via ANSYS CFX software. The geometry is designed using ANSYS Design modeler software and the mesh is created on this geometry using ANSYS Meshing software. The mesh type is Structured with 10,100 cells. Thermal Energy is enabled to capture the temperature. The Mixing & Convection phenomena are involved in this simulation.

Price: Free

Introduction and overview of the Discrete Phase Model (DPM) Introduction to Lagrangian Framework Reference Overview of DPM application in industries and real-world examples DPM pros & cons Particle Life Cycle Introduction to Governing & Trajectories Equations Particle Fate Introduction to Grid-independence study of a DPM case