CFD Beginner Courses
Here's every CFD online course in the Beginner level.
Borehole Flow, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $16
The present problem simulates borehole water flow using ANSYS Fluent software.
Helical Wind Turbine, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate, Advanced
Price: $42
This project uses ANSYS Fluent to numerically simulate a helical wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of about 2,000,000. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.
Darrieus Wind Turbine
Beginner, Intermediate, Advanced
Price: $42
This project uses ANSYS Fluent to numerically simulate a Darrieus wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 2,289,621. The simulation is run as unsteady (transient). The Mesh Motion method is used to define a rotating zone.
Non-Premixed Combustion, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $32
The problem numerically simulates Non-Premixed Combustion using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 11202. We use the Species Model to define the chemical reaction between fuel and oxidizer. We select the Non-Premixed Combustion because the fuel and oxidizer enter the chamber from separate paths.
Airflow Modeling over a Flying Bird, CFD Simulation
Beginner, Intermediate
Price: Free
Aerodynamic Engineering Aerodynamic Coefficients
Air Pollution within a Street Canyon, CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $48
The problem numerically simulates the Air Pollution within a Street Canyon using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1938659. We use a Profile to define input velocity as a function of the input section’s location. We use the Species Transport model to consider the distribution of pollutants in the canyons. We define Source terms for pollutants on the street zones.
Price: Free
The problem numerically simulates the Orifice for Methane Gas Flow using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 54648.
Bioreactor Agitated by Rushton Turbine CFD Simulation
Beginner, Intermediate
Price: $16
The problem numerically simulates the Bioreactor Agitated by Rushton Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3558726. We perform this simulation as unsteady (Transient). We use the Mesh Motion method to define rotational motion.
Rotary Cooling of an object with a Constant Heat Flux, ANSYS Fluent training
Beginner, Intermediate
Price: $10
The present problem simulates the heat transfer and rotary cooling of a wall under a constant heat flux of a model with a semi cylinder shape, using ANSYS Fluent software.