MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: $20
This study simulates the drying seed process in a semi-cylindrical porous domain to analyze airflow, heat, and moisture transfer. The drying seed model uses a half-domain with about 4.5 million tetrahedral cells, including fluid and porous seed zones. A transient, pressure-based solver with the RNG k-ε model and species transport simulates the drying seed. The drying seed simulation shows uniform temperature and decreasing moisture, indicating efficient drying performance.
VTOL Jet Engine Thrust Force Generation, CFD Simulation
Intermediate, Advanced
Price: $150
This report presents a simulation that investigates the thrust generation of a VTOL (Vertical Take-Off and Landing) jet engine operating in vertical mode. The aerodynamic performance and thrust force produced by a rotating fan within a bent pipe configuration were analyzed. The 3D geometry of the bent pipe with fan was created using ANSYS SpaceClaim software. A high-quality unstructured mesh with boundary layer refinement was generated using ANSYS Meshing software. Appropriate turbulence model settings and boundary conditions were applied to correctly simulate the rotating fan dynamics and the resulting thrust force generation.
Price: $120
This project investigates the crystallization of Loratadine in a dual-inlet nozzle using the Population Balance Model (PBM) in ANSYS Fluent. The study focuses on the effects of mixing and flow dynamics on nucleation and crystal growth. A tetrahedral mesh with 506,677 cells was used for accurate flow and particle tracking. A User-Defined Function (UDF) defined the kinetics of crystal formation based on local conditions. The results show realistic particle size distribution and effective prediction of crystallization behavior.
Price: $499
This product numerically simulates a Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The battery pack is constructed of six batteries stacked in Series, called 1P6S. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. The present CFD work is Validated with a reference Article.
Price: $499
This product numerically simulates the Battery with PCM cover using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. We used the Solidification and Melting Model to define phase change material (PCM). The present CFD work is Validated with a reference Article.
Price: $379
This product numerically simulates a single Battery cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define the discharge process of a battery. We use the Multi-Scale Multi-Domain (MSMD) solution method and the NTGK electrochemistry model. The present CFD work is Validated with a reference Article.
Price: $809
The problem numerically simulates a Bayractar UAV using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with Fluent Meshing software. The element number equals 1,199,753 and their type is polyhedra. In this simulation, FW_H and BroadBand Noise are used for acoustic modeling.
Price: $809
The problem numerically simulates an AAI RQ-7 Shadow UAV using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with Fluent Meshing software. The element number equals 5,449,057 and their type is polyhedra. In this simulation, FW_H and BroadBand Noise are used for acoustic modeling.
Price: $809
The problem numerically simulates a RQ-11 Raven UAV using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with Fluent Meshing software. The element number equals 5,300,212 and their type is polyhedra. In this simulation, FW_H and BroadBand Noise are used for acoustic modeling.