MR CFD’s All Courses

Price: $28

2D Ammonia Flashing Simulation. VOF model with three phases (Air, Ammonia liquid and Ammonia Vapor). Lee Model for Evaporation of Ammonia.

Price: $319

The 3D cycloidal rotor CFD simulation models a pitching four-blade rotor to analyze flow behavior and aerodynamic performance. The rotor produces lift by dynamically adjusting blade pitch while rotating, enabling multidirectional thrust. Three disc configurations were tested to assess their effect on efficiency. Results highlight how disc presence alters thrust and torque characteristics, providing insights for design optimization.

Price: $649

This project presents a three-dimensional transient CFD simulation of a four-blade cycloidal rotor using ANSYS Fluent with a moving mesh approach. The rotor uses NACA 0015 blades with prescribed pitching motion, and the flow is modeled with the SST k-omega turbulence model in an unstructured mesh domain. Aerodynamic loads, disk loading, and power loading are computed from the transient solution and compared with the article “Numerical Modelling of Geometrical Effects in the Performance of a Cycloidal Rotor.” The close agreement between the numerical results and the published data confirms the validity of the geometry, mesh, and solver settings used in this study.

Price: $240

ANSYS CFD study of virus transport and comfort in a 10×8 m classroom comparing AC and chilled beam ventilation. Room with desks, eight occupants, AC louvers vs. chilled-beam inlets; unstructured mesh refined near jets, walls, and bodies. Steady pressure-based RANS (realizable k-ε), energy on with buoyancy; virus tracked via DPM; appropriate velocity-inlet and pressure-outlet BCs. AC removes particles faster but shows uneven temperatures, while chilled beams improve thermal uniformity with broader mixing that disperses particles more widely.

Price: $240

LES–VOF simulation of multiphase open-channel flow in a U-shaped channel using ANSYS Fluent. Geometry built in DesignModeler; hexa-dominant ANSYS Meshing with local refinement near the baffle, cylinder array, bend walls, and free surface. Open-channel VOF captures the air–water free surface; LES resolves unsteady vortices (Δt = 0.01 s). Results show interface deformation, outer-wall acceleration, inner-wall separation, and vortex shedding past baffle/cylinders.

Price: $60

This project simulates a shell-and-tube heat exchanger in ANSYS Fluent to analyze coupled flow and heat transfer of water. A pressure-based steady RANS approach with the k–ω SST turbulence model is used, with coupled pressure–velocity solution. The geometry includes shell and tube zones plus a Sterling valve region; a ~2,000,000-cell mesh with inflation layers resolves near-wall gradients. Boundary conditions: velocity inlet (0.3 m/s, 45 °C), pressure outlet, no-slip walls, and cooled valve/tank walls at 13 °C. Results show inlet acceleration, tube-bundle mixing, and progressive cooling, yielding realistic temperature and velocity fields.

Price: $56

This study presents a CFD analysis of a Savonius VAWT using mesh motion in ANSYS Fluent to examine aerodynamic performance and flow characteristics. The rotor geometry was modeled in DesignModeler and meshed with a non-conformal, unstructured grid containing about 5.5 million cells for accurate flow resolution. A transient, pressure-based solver with the RNG k-ε turbulence model was applied; air was used as the working fluid, with rotating and stationary flow zones defined. The simulation revealed pressure variations, wake formation, and vortex structures around the blades, highlighting key aerodynamic behaviors of the Savonius VAWT.

Price: Free

End-to-End UAV Design: Master the complete UAV design methodology, from initial mission analysis to preliminary drone design. Industry-Standard CFD Tools: Gain hands-on expertise with Ansys Fluent and AVL for high-fidelity aerodynamic simulation. Performance & Stability Analysis: Evaluate drone aerodynamics, flight stability, and overall performance through project-driven CFD training.

Price: Free

Learn SpaceClaim from scratch! This complete training course teaches you 3D modeling, geometry editing, and CAD preparation for simulations. Master direct modeling techniques, geometry repair, and simplification tools essential for CFD and FEA analysis. Ideal for engineers and designers working with ANSYS simulations. Step-by-step tutorials take you from beginner to advanced user.