MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: $10
The problem numerically simulates a Perforated Air Distributor for LAMB systems using ANSYS Fluent software. We design the model in Spaceclaim and then meshed it with ANSYS Meshing. The the Species model is activated to see how species are transported. The RNG k-ɛ model is performed to simulate turbulent behavior of the flow.
Price: $8
The problem numerically simulates a Microchannel Heat Sink in ANSYS Fluent software investigating heat transfer and temperature distribution. The geometry of the model is created using SpaceClaim software. The model is meshed in ANSYS Meshing, creating a structured mesh with 440,000 elements.
Price: $14
The problem numerically simulates a Bluff Body Surface Heating on a Reentry Mission in ANSYS Fluent software. The geometry of the model is created using the Design Modeler software. The model is meshed in ANSYS Meshing, creating a structured mesh with 672,515 elements. The K-ω SST model is used to describe the turbulence of the flow.
Water-Cooled Photovoltaic Thermal (PVT) System using Nanofluid, Paper Numerical Validation
Intermediate, Advanced
Price: $360
The current CFD Analysis numerically Validates the Paper "Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal systems" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler, producing structured cells. UDF in SOURCE Macro is used for the heat generation.
Turbulent Asymmetric Vortex Flame CFD Simulation, Paper Numerical Validation
Intermediate, Advanced
Price: $32
The current CFD Analysis numerically Validates the Paper "Computational and experimental investigations of turbulent asymmetric vortex flames" via ANSYS Fluent software. We have designed and meshed the geometry using GAMBIT®, producing unstructured 375,534 cells. The Species Transport model is used to simulate the reaction. The turbulent flow is simulated using these turbulence models: RNG k-epsilon, Realizable k-epsilon, Standard k-epsilon, k-omega, Spalart Almaras and Reynolds stress.
Mixing Pipe, Baffle Configuration Effect on Mixing, CFD Simulation
Beginner, Intermediate
Price: $12
The problem numerically simulates a mixing pipe, baffle configuration effect on mixing in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating structural mesh with 1,330,000 , 1,380,000 and 1,500,000 elements for the different cases. The K-ω SST model is used to describe turbulence of the flow.
Rotary Heat Exchanger, Effect of Mass Flow Rate CFD Simulation
Beginner, Intermediate
Price: $12
The problem numerically simulates a Rotary Heat Exchanger, Effect of Mass Flow Rate on heat transfer coefficient in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 86,598 elements. The Standard k-epsilon model is used to describe turbulency of the flow.
Particle Purifying in Air Intake Room, Design Improvement CFD Simulation
Intermediate, Advanced
Price: $10
The problem numerically simulates an Airflow Inside the Air Intake Room in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating 13,103,505 and 13,867,650 elements for the first and second case respectively. The Discrete Phase Model (DPM) is used to simulate purifying process. The Realizable k-epsilon model is used to describe turbulence of the flow.
Steam Ejector with Gas Methane Fluid CFD simulation, ANSYS Fluent
Intermediate, Advanced
Price: $12
The problem numerically simulates a Steam Ejector with Gas Methane Fluid in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 11,132 elements. We simulate the problem via Density-based solver to define Compressible flow.