MR CFD’s All Courses

Price: $160

The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The DPM multiphase is activated to model the effect of solid particles on erosion. The activated erosion models are Generic, Finnie, McLaury, Oka, and DNV.

Price: $16

The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The Mixture multiphase model is activated to model the effect of solid particles.

Price: Free

Introduction What is the particle state vector? What is the number density function? Discrete method Inhomogeneous discrete method Standard moment method Quadrature moment method DQMOM Summary

Price: $240

This project numerically simulates the Population Balanced Model Crystallization using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 89,244. The multiphase Eulerian multiphase model simulates the mixture (water liquid, Ca, and CO3 ions) and Calcium-Carbonate. The crystallization modeling through PBM is also considered.

Price: $180

This project numerically simulates the Air Bubble PBM using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 23,982. The multiphase Eulerian multiphase model simulates the two-phase flow of water and air. The population balance model also enables simulating bubble dynamics and interactions. Aggregation and Breakage kernels were activated, and the Luo model was used for both kernels. The mixture method for the turbulence interactions of the phases is activated.

Price: $220

This project numerically simulates the Hydro-Abrasive Erosion in Pelton Turbine using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 6,433,121. The multiphase VOF model simulates the water jet. The 2-way DPM model also enables the erosion of the solution. The rotational movement of the turbine is modeled using Mesh Motion Approach.

Price: $180

In this project, an industrial CFD simulation of the Optimization of Shell & Tube Heat Exchanger with Baffle-Cut has been carried out, and the simulation results have been investigated.

Price: $30

This project numerically simulates the Vortex Tube using ANSYS Fluent software. The 3-D geometry is designed in Space Claim software. We used Fluent Meshing Software to generate mesh; the element number equals 497,635. Turbulent flow is modeled with the Spalart Almaras model. The solver is Density-Based and the Sutherland model is used for viscosity.

Price: $160

The problem numerically simulates the Water Jets Impingement using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing to generate mesh; the element number equals 72,000. The Automatic Mesh Adaptation is the mesh method for this problem. The liquid bulk in the domain is simulated using VOF model. Also, the droplets are modeled via DPM model.