MR CFD’s All Courses

Price: $96

The problem numerically simulates the Internal Gear Pump using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 50,106. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (UDF) to define the rotational motion of gears.

Price: $96

The problem numerically simulates the External Gear Pump using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 9,254. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (CG-Motion UDF) to define the rotational motion of gears.

Price: $649

In this study, a comprehensive acoustic simulation of a quadcopter was performed using ANSYS Fluent Studying Acoustic, Pressure, and Motion analysis. We designed the 3-D symmetry model using the SpaceClaim We mesh the model with ANSYS Meshing software, and the element number equals 1,710,236. We perform this simulation as unsteady (Transient). We use the Mesh Motion to define the rotational motion of the Quadcopter blades.

Price: $160

The current CFD Analysis simulates the Color Spray Gun with Wall Film via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is tetrahedral with 560,134 cells. VOF multiphase model, along with the Discrete Phase Model, is used. The liquid wall film boundary condition is also enabled over the painted wall. The Automatic Mesh Adaptation option is used to enhance the quality of the mesh. The solution is Transient.

Price: $28

The current CFD Analysis simulates the Flat Plate Solar Collector, Conjugated Heat Transfer via ANSYS Fluent software. We have designed the initial geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is Tetrahedral with 5592039 cells. Conduction and Convection phenomena are involved in this simulation. Natural Convection is considered in the air domain, and Forced Convection is considered in the heat transfer fluid (HTF) domain. The Discrete Ordinate Radiation model is used.

Price: Free

Overview of Multiphase flows Classification of Multiphase flows Multiphase flow regimes Eulerian-Lagrangian vs. Eulerian-Eulerian approaches VOF model and its applications Eulerian model and its applications Mixture model and its applications Choosing among Eulerian, Mixture, and VOF Summary

Price: Free

Introduction Mixture model Wet steam model Summary

Price: Free

Eulerian model applications & applicability Regime transition modeling Boiling model Interfacial area concentration VS. Algebraic interfacial area Applicable forces Turbulent interaction & models Euler-Granular model Summary

Price: Free

VOF applications & applicability VOF general settings Implicit vs. Explicit formulations Available discretization methods Body force formulation Open channel BC Interface modeling Level set method Surface tension modeling Mass transfer mechanisms