Academic Online Courses

Price: $10

In this project, a Cooking Pot in a Solar Oven is simulated using ANSYS Fluent software. The geometry is created in SpaceClaim, and a mesh consisting of 989,310 elements is generated using ANSYS Meshing. The Discrete Ordinates (DO) model is chosen to simulate radiation heat transfer.

Price: $10

In this project, Internal and External Ventilation in an Ancient Architecture, ANSYS Fluent is simulated using ANSYS Fluent. The 3-D geometry is designed in Design modeler. The meshing in ANSYS Meshing produced 12 millions cells then we made it 2,313,280 polyhedral cells in fluent setup. DO is chosen for the radiation model.

Price: $48

⦁ This problem simulates Bubble Columns Reactor using the VOF model in Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 93,687. ⦁ In this project, the rising of air bubbles is simulated using the VOF model.

Price: $16

This project simulates Noise Reduction Using Chevron Nozzles in Jet Engines using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,317,762 elements was generated using ANSYS Meshing. The broadband noise source model was chosen to simulate noise generation and propagation.

Price: $32

The current CFD Analysis numerically Validates the Paper "Experimental study of shrouded micro-wind turbine" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler and ANSYS Meshing then meshing in fluent, producing 2,356,897 polyhedral elements. MRF is used to simulate rotating zone. The turbulence of the flow is simulated via K-w sst model.

Price: $320

The current CFD Analysis numerically validates the Paper "CFD Investigation on the aerodynamic characteristics of a small-sized wind turbine of NREL PHASE VI operating with a stall-regulated method" via ANSYS Fluent software. We have designed and meshed the geometry using Spaceclaim and ANSYS Meshing then meshing in fluent, producing 5,466,728 elements. MRF is used to simulate rotating zone. The turbulence of the flow is simulated via Realizable k-epsilon model.

Price: $60

In this project, liquid fuel combustion is simulated using DPM module. The geometry was designed in SpaceClaim, and a mesh with 769000 elements was generated using ANSYS Meshing. The species transport module is employed. The fuel is ethanol and the oxidizer is nitrous oxide.

Price: $48

In this project, the airflow within a solar indirect dryer is simulated using ANSYS Fluent. The geometry was designed in SpaceClaim, and a mesh with 1,330,000 elements was generated using ANSYS Meshing. In this simulation, the food trays are modeled as porous. DO is chosen for the radiation model. The density model in the material is chosen as incompressible ideal gas.

Price: Free

Introduction to the Fuel Cell models in ANSYS Fluent software Introduction to the "Fuel Cell and Electrolysis" model ("PEMFC", "SOFC", and "Electrolysis" sub-models) Introduction to the "PEM Fuel Cell" model Introduction to the "SOFC with unresolved electrolyte" model Introduction to the electrochemistry concepts and electrochemical reactions Introduction to the different thermophysical properties Introduction to the user-defined scalars (UDS) and user-defined Memory (UDM)