Academic Online Courses
Here's every CFD online course related to Academic category.
Price: $499
In this project, we perform the numerical simulation of a PEM Fuel Cell Stack System using ANSYS Fluent software. We designed the geometry of the model in 3D using Design Modeler software. We meshed the model using ANSYS Meshing software, and 9,946,409 cells have been generated. We used the Fuel Cell and Electrolysis model and the PEMFC submodel to define the proton-exchange membrane fuel cell. We applied the Stack Management option to define multiple fuel cell units. The Species Transport model is automatically activated because of using the fuel cell model.
DDPM, Proppant Transport among Multicluster Hydraulic Fractures, Paper Numerical Validation
Advanced
Price: $320
The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.
Price: $60
The present problem simulates the aeroacoustics and sound generation by a water flow inside a Francis Turbine using ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 4,914,404cells. We use the Frame Motion (MRF) to define rotation movement. The Broadband Noise Sources model is also used to define the acoustic model
Price: $20
The problem numerically simulates Hydro-Kinetic turbine using ANSYS Fluent software. We design the 3-D model with the Solidworks software. We mesh the model with ANSYS Meshing software, and the element number equals 7,758,370. The Mesh Motion (Sliding Mesh) technique is used to simulate the rotation of the turbine blades The VOF method is used In this simulation.
Bulb Turbine, Sand Erosion Study CFD Simulation
Intermediate, Advanced
Price: $160
The current CFD Analysis models the Bulb Turbine via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The Frame Motion technique is utilized to model the rotation of the turbine. The Discrete Phase Model (DPM) account for the presence of sand particles. The Erosion on the turbine, due to particle collision is investigated.
Price: $629
The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.
Thermoacoustic Analysis in Combustion Chamber CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $60
In this project, we have simulated the Thermoacoustics Analysis in Combustion Chamber using ANSYS Fluent software. Three-dimensional modeling was done using SpaceClaim software. The meshing of the model has been done using ANSYS Meshing software. The Non-Adiabatic Non-Premixed Combustion model models the combustion. The acoustic is modeled via the Broadband Noise Source model.
Price: $20
In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.
Turgo Turbine, ANSYS Fluent CFD Simulation Training
Intermediate
Price: $24
The present problem simulates the water flow inside a Turgo water turbine by ANSYS Fluent software. The geometry is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number is 4,344,106. Mesh Motion (Sliding Mesh) is used to define the rotation of the blades inside the chamber.