Design Modeler Online Courses
Here's every CFD online course related to Design Modeler category.
Price: Free
Thermal Analysis in a storage tank via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 10,056 cells. Energy Equation is enabled to capture the temperature. The Mixing & Convection phenomena are involved in this simulation.
Price: $54
The current CFD Analysis simulates the Acoustic performance of a HAWT via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design modeler software and created the mesh using ANSYS meshing software. The total number of elements is 2,696,011. The Ffowcs Williams & Hawkings acoustic model has been used for acoustic modeling. MRF method has been used in Cell Zone Conditions for turbine rotation.
Price: $54
The current CFD Analysis simulates the Acoustic performance of a HAWT via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design modeler software and created the mesh using ANSYS meshing software. The total number of elements is 2,696,011. The Broadband acoustic model of HAWT has been used for acoustic modeling. MRF method has been used in Cell Zone Conditions for HAWT rotation.
Price: $67
The current CFD Analysis optimizes the geometry of a Submarine via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software with 258,938 cells. RBF Morph (Adjoint Solver) is used for conducting the current problem.
Price: $379
The current CFD project simulates the temperature distribution of a Battery via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is Unstructured with 200,848 cells. MSMD (Multi-Scale Multi physics Battery) and NTGK (Newman, Tiedemann, Gu, and Kim) Models are used to analyze the current Unsteady problem.
Water Distiller (Domestic) CFD Simulation, ANSYS Fluent Training
Intermediate, Advanced
Price: $36
The current CFD project simulates the Domestic Water Distiller working procedure via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is Unstructured with 478,805 cells. The VOF Multiphase and Mass Transfer (Evaporation-Condensation) Models are used to analyze the project.
Airborne Wind Turbine Aerodynamic Analysis, Paper Numerical Validation, ANSYS Fluent Training
Intermediate, Advanced
Price: $24
The current CFD Analysis Validates the Paper 'Aerodynamic analysis of an airborne wind turbine with three different aerofoil-based buoyant shells using steady RANS simulations' via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ICEM CFD software. The mesh type is hexahedra with 859,934 cells. The k-ω SST turbulence model is used in this simulation. The Pressure Coefficient parameter is compared and validated with the article results.
Price: $44
This simulation is about air gap membrane distillation (AGMD) via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 150000 cells. The VOF (volume of fluid) model has been used to define the multiphase model. mass transfer is defined based on the evaporation-condensation mechanism. porosity is defined to express the permeability of the porous medium.
Smoking Room, ANSYS Fluent CFD Simulation Tutorial
Intermediate
Price: $36
The present problem simulates the cigarette smoke inside a smoking room, existing an exhaust fan on the upper wall of the room by ANSYS Fluent software. The geometry of the present model is three-dimensional and has been designed using Design Modeler software. The meshing of the model has been done using Fluent Meshing software. The mesh type is Polyhedra, and the element number is 965,187. The present simulation aims to investigate the movement of smoke in the room, its pathlines, contours, and vectors. Using the both Species transport and Discrete Phase Model (DPM) models.