Design Modeler Online Courses

Price: $4

Discrete Phase Model Dialog Box: interaction, particle treatment, tracking Physical Models: DEM, Breakup, Coalescence, etc Injection Dialog box: injection type, particle type, diameter distribution, etc Drag Laws: spherical, non-spherical, stokes-cunningham, etc Breakup Models: TAB, Wave DPM Boundary Conditions: Trap, reflect, wall-film, etc

Price: $100

This problem simulates the Plate Heat Exchanger by ANSYS CFX software. The geometry of the present model is drawn by Design Modeler in 2.5D and then is meshed by ANSYS Meshing software. The cell number equals 5,096,686. Thermal Energy is enabled to capture the temperature. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).

Price: $120

Thermal Analysis in a storage tank via ANSYS CFX software. The geometry is designed using ANSYS Design modeler software and the mesh is created on this geometry using ANSYS Meshing software. The mesh type is Structured with 10,100 cells. Thermal Energy is enabled to capture the temperature. The Mixing & Convection phenomena are involved in this simulation.

Price: Free

Introduction and overview of the Discrete Phase Model (DPM) Introduction to Lagrangian Framework Reference Overview of DPM application in industries and real-world examples DPM pros & cons Particle Life Cycle Introduction to Governing & Trajectories Equations Particle Fate Introduction to Grid-independence study of a DPM case

Price: $120

The geometry is designed in Design Modeler & meshed in ANSYS Meshing software. One of the patients suffering from respiratory disease. It is one of our goals to prevent it from dispersion. The one-way discrete Phase Model (DPM) is used to model aerosols. An acceptable thermal comfort is our other concern in this project which is controlled by PPD & PMV factors.

Price: $72

The problem numerically simulates the Water Spraying using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the discrete phase model (DPM) to define a Spray process. The Species Transport is defined to select Evaporative Droplet injection for particles. Breakup & Coalescence are considered.

Price: Free

The problem numerically simulates the forced convection heat transfer in an U-bend. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software and the cell number is equal to 2595714.

Price: $330

The problem numerically simulates Darrieus vertical axis wind turbine using ANSYS Fluent software. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the power coefficient. We use the Sliding Mesh model to rotate the rotor of the wind turbine.

Price: $14

The problem numerically simulates a Turboprop Engine Propeller using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The element number equals 9,622,423. Multiple Reference Frames (Frame Motion) are used to model the rotational motion of the propeller. The Density-Based solver is used.