Electrical & Power Online Courses
Here's every CFD online course related to Electrical & Power category.
Price: $16
The problem numerically simulates the Microchannel Heat Source using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 1500000. The Energy Equation is activated to consider heat transfer.
Price: $36
The problem numerically simulates the Darrieus Vertical Axis Water Turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 7422668. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define the change of meshing around the rotating turbine blades. We define a Rigid Body by a rotational motion with one degree of freedom (1-DOF).
Electric Field Effect on Nanofluid Heat Transfer (EHD)
Intermediate, Advanced
Price: $42
In this project, nanofluid flows in a bumpy channel in presence of an applied electrical potential.
Magnetic Field (MHD) Effect on Nanofluid Heat Transfer, 3-D
Intermediate, Advanced
Price: $54
In this project, nanofluid flows in a solid aluminum channel in the presence of an applied magnetic field.
Price: $32
The present project's results are compared with the experimental results of the paper “Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascades at Off-Design Conditions”. Turbulence modeling and Computational procedures (boundary conditions, etc.) are simulated based on the article “Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions”.
Price: $42
The problem numerically simulates Transformer Room Ventilation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 592411. We use the Heat Source and Porous Medium to consider their effect on heat transfer.
Generator Room Ventilation Applying Fans, ANSYS Fluent CFD Simulation Tutorial
Beginner, Intermediate
Price: $42
The problem numerically simulates Generator Room Ventilation Applying Fans using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3854957. Several small and large fans are placed inside the generator room to investigate their effect on heat transfer.
Kaplan turbine CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $36
The problem numerically simulates the Kaplan turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 919824. We use the Frame Motion (MRF) to define the rotational movement.
Vertical Axis Wind Turbine (VAWT): Paper Numerical Validation
Beginner, Intermediate, Advanced
Price: $320
This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.