Fluent Modules Online Courses

Here's every CFD online course related to Fluent Modules category.

724 Courses

Price: $80

This problem simulates Erosion due to particle flow using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 14,029. In this project, the Erosion due to particle flow is simulated using the DPM How the particles flow and lead to the erosion of the solid surface has been well-modeled in this project.

Play

Price: $20

The problem numerically simulates Sea Robot Motion Immersed in the Water using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 30010. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh model to apply the location displacement and the shape changes of computational cells.

Play

Price: $28

In this analysis, the flow inside a wide-edge spillway is investigated.

Play

Price: $20

In this project, the two-phase flow of water and air flowing over an ogee spillway is simulated.

Play

Price: $24

The problem numerically simulates Three-phase flow over a Circular Weir using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4770. We use the Eulerian Multi-Phases model to define three phases of flow, including air, water and sand.

Play

Price: $20

The problem numerically simulates the release of coronavirus particles from a patient's mouth while talking using ANSYS Fluent software. This project investigates the effect of a shield on preventing transmission of the virus particles to another person. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the DPM to study virus particles Discretely in a continuously fluid space. We use a Profile for particle velocity and mass flow rate.

Play

Price: $20

The problem numerically simulates Talking Spread COVID-19 using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define particle virus dispersion. We use a Profile to define virus particles' velocity and mass flow rate.

Play

Price: $210

This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.

Play

Price: $72

The problem numerically simulates virus particles' release from a patient's mouth inside a bank using ANSYS Fluent software. This project is performed in two modes: with and without the plastic cover. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1570219 and 1618366, respectively. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define virus particles dispersed from the mouth. We define an Injection as the Droplet which is evaporated. We use the Species Transport model to define evaporating gas species.

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.