Mechanical Online Courses
Here's every CFD online course related to Mechanical category.
Price: $99
The problem numerically simulates Fish Cage Floating on Seawater using ANSYS Fluent software. This project is performed by the fluid-structure interaction (FSI) method. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4922130. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to consider grid changes over time. We apply the System Coupling to communicate between Fluent and Transient Structural software. We use the VOF Multi-Phase model to define the two-phase flow, including water and air.
Price: $20
The problem numerically simulates Fan Stage (Axial Flow) Aerodynamic Performance using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 757886. We use the Frame Motion model to define rotational motion.
Price: $36
The problem numerically simulates the Darrieus Vertical Axis Water Turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 7422668. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define the change of meshing around the rotating turbine blades. We define a Rigid Body by a rotational motion with one degree of freedom (1-DOF).
Self-Propelled Submarine Motion, Dynamic Mesh (6-DOF)
Intermediate, Advanced
Price: $99
The problem numerically simulates Self-Propelled Submarine Motion using ANSYS Fluent software. We design the 3-D model with the CATIA software. We Mesh the model with ICEM software, and the element number equals 2802219. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to define grid changes. We use a UDF to define the movement as a Rigid Body. We use the VOF Multi-phase model to consider water and air.
Submarine Movement in Water by Dynamic Mesh (1-DOF)
Intermediate, Advanced
Price: $99
The problem numerically simulates the Submarine Movement in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 316846. We define the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the rotational movement. We define a rigid body by considering one degree of freedom. We use the VOF Multi-phase model to define water and air.
Price: $28
The problem numerically simulates the Sound Generation on Airfoil using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 231840. This project has been done in three modes with different angles of attack for airfoils. We use the Broadband Noise Sources model to define the Acoustic model.
Price: $32
The present project's results are compared with the experimental results of the paper “Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascades at Off-Design Conditions”. Turbulence modeling and Computational procedures (boundary conditions, etc.) are simulated based on the article “Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions”.
Kaplan turbine CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $36
The problem numerically simulates the Kaplan turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 919824. We use the Frame Motion (MRF) to define the rotational movement.
Price: $80
This problem simulates Erosion due to particle flow using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 14,029. In this project, the Erosion due to particle flow is simulated using the DPM How the particles flow and lead to the erosion of the solid surface has been well-modeled in this project.