Mechanical Online Courses
Here's every CFD online course related to Mechanical category.
Price: Free
The problem numerically simulates the Orifice for Methane Gas Flow using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 54648.
Price: $80
The present problem simulates two-phase flow inside a hydrodynamic vortex separator using ANSYS Fluent software.
Price: $12
The problem numerically simulates airflow in Jet Intake using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 389136.
Helicopter CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $20
The problem numerically simulates the Helicopter using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 937677. We perform this simulation as unsteady (Transient). The Mesh Motion option is used to define the rotating motion of helicopter blades.
Price: Free
The problem numerically simulates the Flap Effect on the Trailing Edge of an Airfoil using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 64731. We aim to study Drag and Lift forces in this project.
Manifold of Engine CFD Simulation by Species Transport
Beginner, Intermediate
Price: $16
In this project, steady air flow mixing with fuel is investigated in an engine manifold with 3 outlets, where only one outlet is open and the other 2 outlets are blocked.
H-Type Vertical Axis Wind Turbine (VAWT): Mesh Motion
Beginner, Intermediate, Advanced
Price: $28
This project uses ANSYS Fluent to numerically simulate an H-type vertical axis wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,546,624. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational movement.
Series Fans CFD Simulation using MRF Method
Intermediate
Price: $24
The problem numerically simulates the airflow between two 3-bladed Series Fans using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1914000. We use the Frame Motion to define rotational motion for fan blades.
FSI Analysis of Airflow around an Airfoil Vibration
Intermediate
Price: $54
The problem numerically simulates the airflow around an airfoil using ANSYS Fluent software. This project is performed by the fluid-structure interaction (FSI) method. We design the 2-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 56220. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to consider grid changes over time. We apply the System Coupling to communicate between Fluent and Transient Structural software. We use the Density-based solver to consider compressible flow. We use a UDF to determine variable velocity and attack angle.