Moving Mesh (Mesh Motion) Online Courses

Price: Free

Appliances of CFD in flight dynamics Cmα derivative Cnβ derivative Clq derivative

Price: Free

Introduction to Aerodynamics and Aerospace Concepts in ANSYS Fluent Lift force and coefficient determination Drag force and coefficient determination Moment and moment coefficient determination Types of shock wave and shock wave determination

Price: $120

The problem numerically simulates the rotation of Boat Propeller using ANSYS CFX software. The geometry is designed in a 3D model with the SpaceClaim software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 4,037,941. The solution is carried out in transient form. Transient Rotor Stator is set for frame change model of the interfaces.

Price: $40

This tutorial simulates cavitation on a boat propeller using ANSYS Fluent. It applies the Mixture multiphase model with the Schnerr-Sauer cavitation model and mesh motion for the rotating propeller, and examines how pressure distribution and rotational speed drive vapor formation on the blades.

Price: $42

In this project, a flow around a Contra-Rotating Turbine has been simulated, and the results of this simulation have been investigated. This ANSYS Fluent CFD training simulates a contra-rotating VAWT turbine with two blade rows rotating oppositely at 14.7 rad/s. Inlet velocity is 5.3 m/s; mesh motion defines rotations using k-epsilon model and steady pressure-based solver. Results show enhanced pressure/velocity between blades, doubling torque (~1.9 N.m per row) for better power.

Price: $54

The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821. The MRF method is used to rotate the turbine. FSI model analyses total strain, and stress over the turbine.

Price: $649

The problem numerically simulates the dynamic stability derivatives of a flying wing aircraft using ANSYS Fluent The Mesh Motion and UDF files are used to define the rotational and oscillatory motion of the wing. The 3D geometry of the model was created using ANSYS SpaceClaim A high-quality unstructured mesh was generated using ANSYS Meshing The corresponding graphs are drawn and the total number of 24 dynamic derivatives coefficients are correctly extracted.

Price: $330

The problem numerically simulates Darrieus vertical axis wind turbine using ANSYS Fluent software. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the power coefficient. We use the Sliding Mesh model to rotate the rotor of the wind turbine.

Price: $72

CFD analyses For HAWT and VAWT using ANSYS Fluent software. Paper Validation For HAWT. 3-D modeling with the ANSYS Design Modeler and mesh Generation with ANSYS Meshing. The Multiple Reference Frame (MRF) or Frame Motion method is applied for HAWT. The Mesh Motion method is applied for VAWT.