Multi-Phase Flow Online Courses

Price: $220

This project numerically simulates the Hydro-Abrasive Erosion in Pelton Turbine using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 6,433,121. The multiphase VOF model simulates the water jet. The 2-way DPM model also enables the erosion of the solution. The rotational movement of the turbine is modeled using Mesh Motion Approach.

Price: $160

The problem numerically simulates the Water Jets Impingement using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing to generate mesh; the element number equals 72,000. The Automatic Mesh Adaptation is the mesh method for this problem. The liquid bulk in the domain is simulated using VOF model. Also, the droplets are modeled via DPM model.

Price: $24

The problem numerically simulates the Check Valve using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 14,586. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the 6-DOF solver to define the rotational motion of the valve. We use the VOF Multiphase Model to define the air and water. We use the Execute Command to define the interruption of the input flow.

Price: $160

The current CFD Analysis simulates the Color Spray Gun with Wall Film via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is tetrahedral with 560,134 cells. VOF multiphase model, along with the Discrete Phase Model, is used. The liquid wall film boundary condition is also enabled over the painted wall. The Automatic Mesh Adaptation option is used to enhance the quality of the mesh. The solution is Transient.

Price: Free

Overview of Multiphase flows Classification of Multiphase flows Multiphase flow regimes Eulerian-Lagrangian vs. Eulerian-Eulerian approaches VOF model and its applications Eulerian model and its applications Mixture model and its applications Choosing among Eulerian, Mixture, and VOF Summary

Price: Free

Introduction Mixture model Wet steam model Summary

Price: Free

Eulerian model applications & applicability Regime transition modeling Boiling model Interfacial area concentration VS. Algebraic interfacial area Applicable forces Turbulent interaction & models Euler-Granular model Summary

Price: Free

VOF applications & applicability VOF general settings Implicit vs. Explicit formulations Available discretization methods Body force formulation Open channel BC Interface modeling Level set method Surface tension modeling Mass transfer mechanisms

Price: $16

The problem numerically simulates the Flood over Bridge using ANSYS Fluent software. We designed the model by Design Modeler software. The elements are generated with ANSYS Meshing software, and the element number equals 844,311. We perform this simulation as unsteady (Transient). The multiphase VOF model is used to model the air and water phases.