Multi-Phase Flow Online Courses

Price: Free

Introduction and overview of the Discrete Phase Model (DPM) Introduction to Lagrangian Framework Reference Overview of DPM application in industries and real-world examples DPM pros & cons Particle Life Cycle Introduction to Governing & Trajectories Equations Particle Fate Introduction to Grid-independence study of a DPM case

Price: $14

The problem numerically simulates the Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3,886,425. The simulation is performed as unsteady (Transient). We use the Volume of Fluid (VOF) model to define the different phases of the solution. The Mesh Motion option is used to model the rotational movement of the pump.

Price: $42

The problem numerically simulates the Labyrinth spillway using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the Polyhedra element number equals 99,248. The VOF Multiphase model is selected to define water and air in channels.

Price: $36

The current CFD project simulates the Domestic Water Distiller working procedure via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is Unstructured with 478,805 cells. The VOF Multiphase and Mass Transfer (Evaporation-Condensation) Models are used to analyze the project.

Price: $64

The current CFD project simulates the humidification dehumidification (HDH) system which is a model of water desalination methods via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type in the first simulation is Hybrid with 206,928 cells and Unstructured with 553,086 cells in the second case. The Discrete Phase Model (DPM), Species Transport Model, VOF Multiphase Model, Mass Transfer(Evaporation-Condensation), and a Porous Medium are used to analyze the project. Both Humidification and Dehumidification are simulated separately.

Price: $44

This simulation is about air gap membrane distillation (AGMD) via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 150000 cells. The VOF (volume of fluid) model has been used to define the multiphase model. mass transfer is defined based on the evaporation-condensation mechanism. porosity is defined to express the permeability of the porous medium.

Price: $36

The present problem simulates the cigarette smoke inside a smoking room, existing an exhaust fan on the upper wall of the room by ANSYS Fluent software. The geometry of the present model is three-dimensional and has been designed using Design Modeler software. The meshing of the model has been done using Fluent Meshing software. The mesh type is Polyhedra, and the element number is 965,187. The present simulation aims to investigate the movement of smoke in the room, its pathlines, contours, and vectors. Using the both Species transport and Discrete Phase Model (DPM) models.

Price: $120

In this project, the Contact Angle Effect on the Friction Factor in Hydrophobic Surfaces is studied in ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software. Also, we created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 250,047 cells. To simulate the multiphase treatment of the solution, the VOF model is chosen.

Price: $140

In this project, a 3-Phase Horizontal Separator with an Oil Bucket is simulated.