Multi-Phase Flow Online Courses
Here's every CFD online course related to Multi-Phase Flow category.
Lifting Dam CFD Simulation, Ansys Fluent Training
Beginner, Intermediate
Price: $24
In this project, two different cases of lifting dams have been simulated and the results have been investigated.
Tank Discharge CFD Simulation, Ansys Fluent Training
Intermediate
Price: $16
In this project, the Rectangular Tank's water discharge has been simulated and the results have been investigated.
Price: $12
In this project, Fountain Waterfall has been simulated and the results have been investigated.
Price: $32
The problem numerically simulates the Pollution Spread in the Stagnant River using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 161562. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define the phases of water and pollutant.
Price: $360
The problem numerically simulates Population Balance Model (PBM) for Nucleation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 112077. We use the Species Transport model to define a mixture of water, calcium, and oxalate as the initial phase. We use the Eulerian Multiphase model to define a two-phase flow, in which the secondary phase is calcium-oxalate, resulting from a chemical reaction. We use The population balance model (PBM) to study produced particles' behavior and predict the density or population of particles in specific sizes. We use a UDF function to define the nucleation and growth rates in PBM analysis.
Accumulation of Particles in Elbow Bend by DDPM
Intermediate, Advanced
Price: $210
The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.
Single Slope Solar Still, Paper Numerical Validation, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $520
The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.
Price: $28
The problem simulates a two-phase flow (water and air) inside an open channel with a 180-degree arc using ANSYS Fluent software.
Price: $80
The problem numerically simulates the Venturi Flow in a Tube for Air Suction using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software. The mesh type is Structured, and the element number equals 193932. The simulation is dependent on time so is performed in a transient form. We use the VOF Multiphase model to define a two-phase flow.