Multi-Phase Flow Online Courses
Here's every CFD online course related to Multi-Phase Flow category.
Boiling inside a Nanotube CFD Simulation Training
Intermediate, Advanced
Price: $32
The problem numerically simulates the boiling process inside a nanotube using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model by ANSYS Meshing software. The mesh type is Structured,, and the element number equals 757886. We define a boiling model with the Eulerian multiphase model. We use a mass transfer to define the phase conversion process from liquid to gas.
Price: $240
The problem numerically simulates the effect of an earthquake on a dam using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 812943. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define water and air. We use the Frame Motion to define a movement in this model with a UDF.
Hydrate Formation in Elbow Pipe, Mixture Multiphase
Intermediate, Advanced
Price: $32
The problem numerically simulates hydrate formation flow inside a tube with a 90-degree elbow using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 55040. We use the Mixture Multi-Phase to define hydrate material. We define a Mass Transfer in the form of Evaporation-Condensation.
Price: $27
The present problem simulates a two-phase flow within a compound channel using ANSYS Fluent software. This simulation is based on the information from a reference article, "Application of the Shiono and Knight Method in compound channels with non-prismatic floodplains," and its results are compared and validated with the results in the article.
Price: $80
The present problem simulates two-phase flow inside a hydrodynamic vortex separator using ANSYS Fluent software.
Price: $12
The problem numerically simulates the Sloshing Water in a Cube using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 168367. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define water and air.
Water Infiltration into a Porous Concrete Block, ANSYS Fluent Simulation Training
Beginner, Intermediate
Price: $24
The problem numerically simulates Water infiltration into a porous concrete block using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number about 1million. We perform this simulation as unsteady (Transient). We use the Porous medium to study water infiltration into a porous concrete block. We use the VOF Multi-Phase model to define two-phase flow inside a concrete block.
Price: $72
The problem numerically simulates the Falling Objects into Water using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 8727. We perform this simulation as unsteady (Transient). We use Dynamic Mesh to apply mesh changes over time. A UDF is used to define cubes' motion toward the water surface. We use the VOF Multi-Phase model to define water and air.
Cavitation Flow Through an Axial Inducer Simulation
Intermediate
Price: $80
The problem numerically simulates Cavitation Flow Through an Axial Inducer using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 938174. We use the Frame Motion method to define the rotational movement in cell zone conditions. We use the VOF Multi-Phase model to define the two-phase flow, including liquid and vapor.