Multi-Phase Flow Online Courses
Here's every CFD online course related to Multi-Phase Flow category.
Price: $28
In this analysis, the two-phase flow of water and air inside an open channel is investigated.
Open-channel two-phase flow in rough rivers CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $24
This problem simulates open-channel two-phase flow in a rough river using Ansys Fluent software. The 3-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 839,470. In this project, the two-phase flow is simulated using the VOF model. How water flows over rough river, in this project is well modeled. In this project, open channel flow sub-model has been used. In this project, concept of convergence has been well described.
Price: $48
The problem numerically simulates a Gas-Liquid Separator using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 356230. We use the VOF Multi-phase model to define Hydrogen-sulfide and Oil in the chamber.
Price: $16
The problem numerically simulates the Fuel Injector using ANSYS Fluent software. We design the 3-D model by the Gambit software. We Mesh the model by Gambit software. The Mesh type is Structured, and the element number equals 932107. We use the Mixture Multi-Phase model to define three phases: air, liquid and vapor.
Non-Newtonian Fluid Flow Between Two Moving Eccentric Cylinders
Beginner, Intermediate
Price: $32
The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.
Ejector Two-Phase Flow CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $20
In this project, a two-phase flow of vapor and liquid ammonia in a two-phase ejector has been simulated by ANSYS Fluent software.
Eulerian Two Phase Flow within a Convergent-Divergent Channel, ANSYS Fluent
Beginner, Intermediate
Price: $16
The problem numerically simulates the Two-Phase Flow within a Convergent-Divergent Channel using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 175500. We use the Eulerian Multiphase model to define the two-phase flow.
Cavitation in a Radial Flow Pump CFD Simulation
Intermediate
Price: $72
The problem numerically simulates the Cavitation in a Radial Flow Pump using ANSYS Fluent software. We design the 3-D model by the Bladegen software. We mesh the model with Turbogrid software, and the element number equals 63308. We use the Frame Motion (MRF) to define rotation movement. We use the VOF Multi-Phase Model to define water liquid and water vapor. We define a mass transfer between water and vapor to consider Cavitation.
Nano Fluid in Heat Source Channel, Mixture Multiphase
Beginner, Intermediate
Price: $24
The problem numerically simulates the Nano Fluid Flows in a Heat Source Channel using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2160625. We use the Mixture Multiphase model to define a nanofluid.