Species Transport Online Courses

Price: $16

This report presents a simulation examining the difference in thermal efficiency between a conventional combustor and an AVC. The formation of NOx and its emission in these two combustion chambers have been compared. The geometry of the AVC and the conventional combustor was created using ANSYS SpaceClaim software. A high-quality hexahedral elements mesh was generated using ANSYS Meshing software. Appropriate species transport and NOx settings were applied and the thermal efficiency of the combustors and the NOx ppm was calculated.

Price: $22

Reactors with risers. This resulted in successfully modeling the FCC reaction-regeneration system in a single CFD example The 3D virtual full-loop CFD simulation provided a detailed and comprehensive perspective of the reaction regeneration system's performance The gas-solid interactions inside the FCC regenerator can be simulated using the Eulerian-Eulerian method The solid phase was treated using the Eulerian granular flow model The species transport model was implemented to monitor several chemical species

Price: $14

This report presents a simulation of the domestic burning gas fed by LPG-air using ANSYS Fluent software. The geometry of the domestic burning gas was created using solidworks software. A high-quality mesh of about 316,680 hexahedron elements was generated using ANSYS Meshing software. Appropriate species transport settings and turbulence-chemistry interaction model were applied.

Price: $240

This project investigates the thermal management of an electronic engine using CFD simulation through ANSYS Fluent software suite The primary objective was to compare the cooling effectiveness of the engine under two conditions: without water spray cooling and with water spray cooling The simulation workflow began with geometry creation in SpaceClaim, followed by mesh generation in ANSYS Meshing. The simulation framework utilised species transport modelling and implemented a two-way coupled discrete phase model (DPM) specifically for water spray simulation

Price: $28

In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee

Price: $949

This project numerically simulates the PEM Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software and the Structured mesh including 270,0000 elements is generated. We use the Fuel Cell and Electrolysis Model to define a fuel cell system. We used the PEMFC sub-model to define a proton-exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O. The present CFD work is Validated with a reference Article.

Price: $16

This report details a Computational Fluid Dynamics (CFD) simulation of a furnace using ANSYS Fluent. The study investigates combustion processes, species transport, and NOx production to optimize furnace design and reduce emissions. The simulation employs a steady-state, pressure-based solver with the Realizable k-epsilon turbulence model. Results include density stratification, species distribution, temperature gradients, and flow patterns, providing valuable insights into combustion dynamics and pollutant formation within the furnace.

Price: $48

This study simulates diesel-air mixture flow with fuel droplet evaporation using ANSYS Fluent CFD software. The 3D cylindrical chamber geometry is designed in SpaceClaim. Meshing is performed using ANSYS Meshing, resulting in over 2 million elements. The Species Transport model with Eddy-Dissipation is employed for turbulence-chemistry interaction. The Discrete Phase Model (DPM) is utilized to simulate fuel droplet movement and evaporation.

Price: $36

In this project, a V-Flame is simulated using the Zimont model, then compared with the paper "Numerical simulation of a premixed turbulent V-shaped flame." by Ansys Fluent software. Premixed combustion of methane-air is ​​simulated, comparing the Zimont and Eddy Break-Up models. The geometry is designed in Spaceclaim software. A structured grid is used to create a mesh in the computing domain using ANSYS Meshing software.