Species Transport Online Courses

Price: $330

The problem numerically simulates the Solar Water Desalination using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 16000. We perform this simulation as unsteady (Transient). We use the Species Transport model to define 3 different species. We use a UDF to define mass transfer rate in the form of evaporation-condensation.

Price: $330

The present study investigates the performance of a solar-still thermal desalination unit.

Price: $20

The problem simulates a mass fraction of carbon dioxide changes as the pollutant in an urban street by ANSYS Fluent software. The present model is three-dimensional and is drawn using the Design Modeler software. The meshing is done using ANSYS Meshing software. The element number is 4137570. Simulation using the Species Transport solves a Transport Equation for each component of the pollution mixture. The simulation is Transient since the goal is to study changes in carbon dioxide concentration over time.

Price: $390

The present problem simulates the gasification process inside a gasifier chamber by ANSYS Fluent. The present 3-D model is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The element number is 219170. Water vapor is created by the process of evaporation of water droplets inside the chamber by applying DPM. The species transport model with volumetric reactions has been used and to define the type of reactants and the process of chemical reactions. The CHEMKIN mechanism has been used, which includes 5 chemical reactions involving 8 different types of reactants and products. This model also assumes that Radiation heat transfer due to chemical reactions occurs inside the gasifier chamber, and hence, the P1 model is defined for simulation.

Price: $28

In this project, methane-air fuel mixture combustion inside a gas turbine combustion chamber is simulated by ANSYS Fluent software. The geometry required for this analysis, which includes only the gas turbine injector part, is designed in ANSYS Design Modeler and mesh inside ANSYS Meshing. The mesh type used for this geometry is structured and the element number is 197006. the species transport model is used to analyze the combustion process by applying the Eddy Dissipation method. Simulation is done using a density-based solver.

Price: $210

In this project, the pollutant prediction is simulated inside a combustion chamber by ANSYS Fluent. This process will also result in different productions, including pollutants like NOx, SOx, Soot, etc. The species transport model is used to analyze the combustion process. The Finite Rate / Eddy Dissipation method has been used to investigate the chemical-turbulent interaction of combustion reactants, applying a Probability Density Function (PDF). The Ideal Gas equation has also been used to determine the density changes due to temperature changes.

Price: $220

In this product, a spray dryer is simulated by ANSYS Fluent software. The geometry of this project has been designed using Desing Modeler software The mesh was created on this geometry using ANSYS Meshing software. The element number is 84047. We have used the Species Transport Model in this simulation. The hot airflow, is responsible for evaporating the moisture in the solution.

Price: $32

In this project, a combustion chamber is simulated by ANSYS Fluent software applying a Transient and Pressure-based solver, considering the gravity effect. The geometry of the present model is 3-D, and Design Modeler software designs it. ANSYS Meshing software performs the meshing of the current model. The element number is equal to 694928. The Species Transport Model is activated to model the combustion.

Price: $28

This problem simulates the HVAC of an operating room by ANSYS Fluent software. A linear flow called an air curtain prevents contaminated flow into the fresh air, as an HVAC system. The geometry of the present model is drawn by Design Modeler software. The model is then meshed by ANSYS Meshing software. The element number is equal to 4137570. The Species Transport model is used to analyze the behavior of different species.