CFD Intermediate Courses

Price: $36

The problem numerically simulates the Sub-Oceanic Volcanic Activity using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 42,751. We perform this simulation as unsteady (Transient). The multiphase VOF model is used to model the three phases of air, water and vapor. Evaporation and condensation is used for mass transfer mechanism.

Price: $100

The problem numerically simulates the rotation of Boat Propeller using ANSYS CFX software. The geometry is designed in a 3D model with the SpaceClaim software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 4,037,941. Frozen Rotor is set for frame change model of the interfaces.

Price: $42

In this project, a flow around a Contra-Rotating Turbine has been simulated, and the results of this simulation have been investigated. This ANSYS Fluent CFD training simulates a contra-rotating VAWT turbine with two blade rows rotating oppositely at 14.7 rad/s. Inlet velocity is 5.3 m/s; mesh motion defines rotations using k-epsilon model and steady pressure-based solver. Results show enhanced pressure/velocity between blades, doubling torque (~1.9 N.m per row) for better power.

Price: $54

The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821. The MRF method is used to rotate the turbine. FSI model analyses total strain, and stress over the turbine.

Price: $60

The problem numerically simulates a Porous Zone inside 3D cylinder using ANSYS CFX software. We modeled the geometry using ANSYS Design Modeler and created the mesh using ANSYS Meshing software. The mesh type is Structured and the number of them is 1,308,762. Porosity has been used in the simulation. Pressure Drop inside the channel due to porosity is investigated.

Price: $80

The problem numerically simulates the Von Kármán effect behind a cylinder using ANSYS CFX software. The geometry is designed in a 2.5D model with the Design Modeler software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 77,262. Body of Influence option is used to create smaller elements around the cylinder. The Transient and Steady form of the solution is performed.

Price: $100

The problem numerically simulates the Pond Overflow using ANSYS CFX software. The geometry is designed in a 2.5D model with the Design Modeler software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 55,418. The homogeneous Multiphase model defines water and air beside Free Surface Model.

Price: $4

Discrete Phase Model Dialog Box: interaction, particle treatment, tracking Physical Models: DEM, Breakup, Coalescence, etc Injection Dialog box: injection type, particle type, diameter distribution, etc Drag Laws: spherical, non-spherical, stokes-cunningham, etc Breakup Models: TAB, Wave DPM Boundary Conditions: Trap, reflect, wall-film, etc

Price: $100

This problem simulates the Plate Heat Exchanger by ANSYS CFX software. The geometry of the present model is drawn by Design Modeler in 2.5D and then is meshed by ANSYS Meshing software. The cell number equals 5,096,686. Thermal Energy is enabled to capture the temperature. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).