MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Airplane Washing Using Water Jet, CFD Simulation ANSYS Fluent Training
Beginner, Intermediate
Price: $42
This project was performed to simulate aircraft washing using a water jet by ANSYS Fluent software.
Price: $31.50
In this project, a NACA0012 Airfoil with the RBF (Mesh Morphing) Method has been simulated, and the results of this simulation have been investigated.
Price: $36
The problem numerically simulates the Sound Generation of a Ceiling Fan in a Room using ANSYS Fluent software. We design the 3-D model of Sound Generation of Ceiling Fan by the Design Modeler software. We Mesh the model of Ceiling Fan by ANSYS Meshing software, and the element number equals 720783 and 534016. We perform this simulation as unsteady (Transient). This Project simulates Acoustic with two models, including Ffowcs Williams and Hawkings and Wave equation. We use the Mesh Motion method to define the rotational of the fan.
Price: $200
In this project, Boiling Phenomenon to investigate three-volume fraction discretization methods has been simulated and the results of this simulation have been investigated.
Price: $180
In this project, an elbow optimized with the RBF (Mesh Morphing) Method and the results of this simulation has been investigated.
Greenhouse Ventilation CFD Simulation Tutorial
Beginner, Intermediate
Price: $36
The problem numerically simulates the Greenhouse Air Ventilation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 216456. We perform this simulation as unsteady (Transient). We use the DO Radiation and Convection method for heat transfer.
Price: $28
Simulation of Inviscid Supersonic Flow Over F-16 Aircraft. CFD Analysis of High Much Flow. Steady State CFD Simulation. Using Fluent Meshing Software for Mesh Generation.
Price: $20
The problem numerically simulates Sandwiched PCM between two concentric cylindrical tubes using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 360000. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.
Lumen Blood Vessel (FSI & Non-Newtonian), CFD Simulation Ansys Fluent Training
Intermediate, Advanced
Price: $54
The problem numerically simulates Lumen Blood Vessel using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 356794. We perform this simulation as unsteady (Transient). We use the fluid-solid interaction (FSI) module to consider wall displacement. We use a UDF to define pulse velocity inlet and pulse pressure outlet. We use the Carreau model to define the blood as a Non-Newtonian fluid.