ANSYS Fluent Online Courses
Here's every CFD online course related to ANSYS Fluent category.
Electric Field Effect on Nanofluid Heat Transfer (EHD)
Intermediate, Advanced
Price: $42
In this project, nanofluid flows in a bumpy channel in presence of an applied electrical potential.
Submarine Movement in Water by Dynamic Mesh (1-DOF)
Intermediate, Advanced
Price: $99
The problem numerically simulates the Submarine Movement in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 316846. We define the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the rotational movement. We define a rigid body by considering one degree of freedom. We use the VOF Multi-phase model to define water and air.
Magnetic Field (MHD) Effect on Nanofluid Heat Transfer, 3-D
Intermediate, Advanced
Price: $54
In this project, nanofluid flows in a solid aluminum channel in the presence of an applied magnetic field.
Floating Vessel Motion in Water by Dynamic Mesh, ANSYS Fluent Training
Intermediate, Advanced
Price: $60
The problem numerically simulates the Floating Vessel Motion in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 902808. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the motion with two degrees of freedom. We use the VOF Multiphase model and the Open Channel condition to define the water level inside the air.
FCC Riser Gas-Solid Separation System Simulation
Intermediate
Price: $48
The present problem simulates gas-solid flow within a fluid catalytic cracking (FCC) system using ANSYS Fluent software.
Price: $32
The present project's results are compared with the experimental results of the paper “Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascades at Off-Design Conditions”. Turbulence modeling and Computational procedures (boundary conditions, etc.) are simulated based on the article “Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions”.
Price: $42
The problem numerically simulates Transformer Room Ventilation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 592411. We use the Heat Source and Porous Medium to consider their effect on heat transfer.
Generator Room Ventilation Applying Fans, ANSYS Fluent CFD Simulation Tutorial
Beginner, Intermediate
Price: $42
The problem numerically simulates Generator Room Ventilation Applying Fans using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3854957. Several small and large fans are placed inside the generator room to investigate their effect on heat transfer.
Price: $80
The problem numerically simulates Planar Heat Exchanger with Mixing Tabs using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4017548. The Energy Equation is activated to consider heat transfer in the heat exchanger.