ANSYS Fluent Online Courses
Here's every CFD online course related to ANSYS Fluent category.
Price: Free
In this project, the heat transfer process on a rough surface having small serrated fringes is analyzed and simulated.
Vertical Axis Wind Turbine (VAWT): Paper Numerical Validation
Beginner, Intermediate, Advanced
Price: $320
This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.
Price: $8
The heat transfer inside a double pipe heat exchanger with dish-shaped strip inserts is investigated in this project.
Price: $72
The problem numerically simulates virus particles' release from a patient's mouth inside a bank using ANSYS Fluent software. This project is performed in two modes: with and without the plastic cover. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1570219 and 1618366, respectively. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define virus particles dispersed from the mouth. We define an Injection as the Droplet which is evaporated. We use the Species Transport model to define evaporating gas species.
Nanofluid and Twisted Tape Inserts in a Tube, Validation
Beginner, Intermediate
Price: $72
The problem numerically simulates the Al2O3-Water Nanofluid in a Tube with Twisted Tape Inserts using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2148662. We define Nanofluid with two methods, including the Multiphase model and fluid properties. This simulation is validated with a reference article.
shell and tube with staggered baffles, Paper Validation
Beginner, Intermediate
Price: $200
The problem numerically simulates the shell and tube heat exchanger with staggered baffles using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 8031342. This simulation is validated with a reference article.
Hydrocyclone with a Tangent-Circle Inlet CFD Simulation, Paper Numerical Validation
Intermediate, Advanced
Price: $210
The problem numerically simulates the Hydrocyclone with a Tangent-Circle Inlet using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 228517. This simulation is validated with a reference article. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define water and air.
Price: $360
The problem numerically simulates Pool Boiling using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 60000. This project is simulated and validated with a reference article. We perform this simulation as unsteady (Transient). We use the VOF Multi-phase model to define the two-phase flow.
Impeller of an Electrical Motor, Airflow Analysis
Beginner, Intermediate
Price: $28
The problem numerically simulates the Impeller of an Electrical Motor using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1786708. We use the Frame Motion method to define the rotation of the impeller.