CFD Online Courses

Price: $320

The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.

Price: $160

The current CFD Analysis models the Bulb Turbine via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The Frame Motion technique is utilized to model the rotation of the turbine. The Discrete Phase Model (DPM) account for the presence of sand particles. The Erosion on the turbine, due to particle collision is investigated.

Price: $629

The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.

Price: $60

In this project, we have simulated the Thermoacoustics Analysis in Combustion Chamber using ANSYS Fluent software. Three-dimensional modeling was done using SpaceClaim software. The meshing of the model has been done using ANSYS Meshing software. The Non-Adiabatic Non-Premixed Combustion model models the combustion. The acoustic is modeled via the Broadband Noise Source model.

Price: $20

In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.

Price: $140

In this project, we have simulated the performance of a Mist Eliminator using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 2,062,734. The Discrete Phase Model (DPM) is used to model water-liquid particles in transient mode. The Realizable K-epsilon model is selected for turbulence characteristics of fluid flow.

Price: $20

In this project, we have simulated performance of a Bladeless Fan using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 1,927,707. The standard k-epsilon model is used to simulate the turbulence of the flow.

Price: $24

The problem numerically simulates the water viscosity exchange based on temperature using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 133,400. We use the User-Defined Function (UDF) to define a viscosity relation. We use the Property Macro for UDF.

Price: $24

The problem numerically simulates the air pressure profile in an urban area using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 118,400. We use the User-Defined Function (UDF) to define a pressure profile. We use the Profile Macro for UDF.