DPM Online Courses

Price: $200

The problem numerically simulates Diesel Spray Ultra-High Injection using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 675000. This project is simulated and validated with a reference article. We use the Discrete Phase Model (DPM) to define the fuel injection process.

Price: $36

The problem numerically simulates the Corona Virus Patient's Breathing in Clean Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 5666870. We use the Discrete Phase Model (DPM) to define the release of coronavirus particles. We investigate two factors to evaluate Thermal Comfort: PMV (predicted mean vote) and PPD (predicted percentage of dissatisfaction).

Price: $120

The problem numerically simulates COVID-19 Patient TRANSIENT Breathing in Operating Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4354238. We perform this simulation as unsteady (Transient). We use the Species Transport Model to define oxygen, carbon dioxide, etc, for air conditioning applications. We use the Discrete Phase Model (DPM) to define particle injection from the patient's mouth. We use the UDF to define breathing flow rate.

Price: $260

The problem numerically simulates the biomass combustion process inside a gasifier chamber using ANSYS Fluent software. We design the 2-D model by the Gambit software. We Mesh the model by Gambit software, and the element number equals 1108. We use the DPM model to define spraying the fuel in the chamber as discrete particles. We define Non-Premixed Combustion in the Species model. We use the P1 Radiation model to define radiant heat energy from the flames.

Price: $20

The problem numerically simulates the process of water spray into a cubic space using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 25464. We perform this simulation as unsteady (Transient). We use the Discrete Phase Model (DPM) model to define a spray process.

Price: $20

The problem numerically simulates the Erosion in a 90-degree Knee using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4319695. We use the Discrete Phase Model (DPM) to simulate the injection of solid particles in the pipeline. The Erosion mode is selected to consider the impact of particles on the body of the pipelines.

Price: $390

The present problem simulates the gasification process inside a gasifier chamber by ANSYS Fluent. The present 3-D model is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The element number is 219170. Water vapor is created by the process of evaporation of water droplets inside the chamber by applying DPM. The species transport model with volumetric reactions has been used and to define the type of reactants and the process of chemical reactions. The CHEMKIN mechanism has been used, which includes 5 chemical reactions involving 8 different types of reactants and products. This model also assumes that Radiation heat transfer due to chemical reactions occurs inside the gasifier chamber, and hence, the P1 model is defined for simulation.

Price: $160

The present simulation investigates the air conditioning system of a computer room by ANSYS Fluent software We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is unstructured with 3089035 cells. Floor Heating and Ceiling Cooling methods are applied for the HVAC. In these systems, the buoyancy effect causes free heat transfer inside the office space. Considering Radiation, DPM, and heat sources.

Price: $220

In this product, a spray dryer is simulated by ANSYS Fluent software. The geometry of this project has been designed using Desing Modeler software The mesh was created on this geometry using ANSYS Meshing software. The element number is 84047. We have used the Species Transport Model in this simulation. The hot airflow, is responsible for evaporating the moisture in the solution.