DPM Online Courses
Here's every CFD online course related to DPM category.
Price: $72
The present problem simulates the Misting System for Ventilation of a café. The geometry of the present model is three-dimensional and has been designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The mesh type is Polyhedra, and the element number is 235,8491 . The present simulation aims to investigate the movement of Misting System particles, their pathlines, contours, and vectors. Using the both Species transport and Discrete Phase Model (DPM) models.
Air Intake of Gas Turbine Considering Fogging System, CFD Simulation ANSYS Fluent Training
Intermediate
Price: $12
In this project, a part of the air intake duct of the gas turbine is simulated, considering the fogging system via Ansys Fluent.
Circulating Fluidized Bed (CFB) Gasifier, CFD Simulation ANSYS Fluent Training
Intermediate, Advanced
Price: $390
This project involves the simulation of air and biomass combustion in a Circulating Fluidized Bed (CBF) using CFD techniques. The primary objectives are to examine the combustion characteristics of Probability Density Function (PDF) for biomass combustion simulation. The CFB is defined with specific boundary conditions, and simulations are performed using a steady-state for fluid flow, unsteady for DPM, and incompressible flow model. The turbulent flow within the CFB is modeled using the realizable k-e turbulent model and thermal radiation is simulated with the P1 model. The simulation incorporates the single rate model for devolatilization of biomass and the intrinsic model for particle combustion.
Dehumidifier With DPM Model, CFD Simulation ANSYS Fluent Training
Intermediate, Advanced
Price: $12
The present simulation is about a Dehumidifier With DPM Model via ANSYS Fluent, and the results of this simulation have been analyzed.
Electric Field Effect on Nanofluid Considering Charge Density, CFD Simulation, ANSYS Fluent Training
Intermediate, Advanced
Price: $54
The problem numerically simulates the Electric Field Effect on Nanofluid Considering Charge Density using ANSYS Fluent software. We design the 3-D model by the Spaceclaim and create the mesh using ANSYS Meshing software. The element number equals 904,145. The EHD model is used to simulate the electric field effect. The DPM model simulates the second phase, which is aluminum nanoparticles.
Abrasive Fluid Jet, CFD Simulation ANSYS Fluent Training
Beginner, Intermediate
Price: $8
In this project, an abrasive fluid Jet has been simulated by ANSYS Fluent software.
Fuel Injection inside a Chamber 2-D CFD Simulation
Intermediate
Price: $100
In this project, Injection inside a 2D Chamber with DPM has been simulated, and the results of this simulation have been investigated.
Hourglass CFD Simulation Using DDPM and DEM
Intermediate, Advanced
Price: $150
The problem numerically simulates the Hourglass using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 244675. We perform this simulation as unsteady (Transient). We use the Discrete Concentrated Phase Method (DDPM).
Revolving Rice Dryer Using DPM CFD Simulation
Intermediate, Advanced
Price: $240
In this project, a revolving rice dryer using one-way DPM has been simulated and the results of this simulation have been investigated.