DPM Online Courses

Price: $8

In this project, the Particle Emission from a Bursting Fire Extinguisher is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,172,162 elements was generated using ANSYS Meshing. The Discrete Phase Model (DPM) was chosen to simulate emission released from capsule. The turbulence effect is modeled with the k-ε standard model.

Price: $32

The current CFD Analysis numerically validates the Paper "Axial segregation of a binary mixture in a rotating tumbler with non-spherical particles: Experiments and DEM model validation" via ANSYS Fluent software. We have designed and meshed the geometry using SpaceClaim and ANSYS Meshing producing 31,428 elements. Mesh Motion is used to simulate rotation of the tumbler.

Price: $240

In this project, a Circulating Fluidized Bed(CFB) Boiler is simulated using ANSYS Fluent software. The 3-D geometry is designed in spaceclaim then meshed in ANSYS Meshing producing 437,472 unstructured cells. The species transport including volumetric reactions, is taken into account for modeling combustion. The DPM model is used to model the particles.

Price: $60

In this project, liquid fuel combustion is simulated using DPM module. The geometry was designed in SpaceClaim, and a mesh with 769000 elements was generated using ANSYS Meshing. The species transport module is employed. The fuel is ethanol and the oxidizer is nitrous oxide.

Price: $10

The problem numerically simulates an Airflow Inside the Air Intake Room in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating 13,103,505 and 13,867,650 elements for the first and second case respectively. The Discrete Phase Model (DPM) is used to simulate purifying process. The Realizable k-epsilon model is used to describe turbulence of the flow.

Price: $320

The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.

Price: $160

The current CFD Analysis models the Bulb Turbine via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The Frame Motion technique is utilized to model the rotation of the turbine. The Discrete Phase Model (DPM) account for the presence of sand particles. The Erosion on the turbine, due to particle collision is investigated.

Price: $140

In this project, we have simulated the performance of a Mist Eliminator using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 2,062,734. The Discrete Phase Model (DPM) is used to model water-liquid particles in transient mode. The Realizable K-epsilon model is selected for turbulence characteristics of fluid flow.

Price: Free

Introduction to USer-Defined Function (UDF) in ANSYS Fluent software Introduction to UDF running methods Introduction to Mesh Terminology Introduction to Model-Specific Macros category Introduction to General Purpose Macros category Introduction to Multiphase Macros category Introduction to Discrete Phase Model (DPM) Macros category Introduction to Dynamic Mesh Macros category Introduction to Additional Macros category