DPM Online Courses

Price: $100

In this project, wind-driven rain has been simulated, and the results of this simulation have been investigated.

Price: $140

The problem numerically simulates Sedimentation and Erosion in a Shell and Tube Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 640618. We perform this simulation as unsteady (Transient). We use Discrete Phase Model (DPM) to define Sand Injection inside the heat exchanger. We aim to predict the Erosion Effect by different methods: Finnie, Oka, and Mclaury.

Price: $180

In this project, three different HVAC models were analyzed to investigate the effect of different types of ventilation inside a room, in which a corona patient breathes, on the breathing particles coming out from the patient's mouth, and how they spread inside this room.

Price: $24

In this project, the decomposition of MgO with argon gas for magnesium particle production is simulated.

Price: $210

The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.

Price: $30

In this study, using the DPM (Discrete phase material) method, the effect of impurities in the working fluid on the splitter erosion was investigated.

Price: $120

The problem numerically simulates the Sedimentation in Urban Sewer Conduits using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 14280. We use the dense discrete phase model (DDPM)to define water and sand particles.

Price: $280

The present problem simulates the flow of water vapor passing through a demister containing saline water droplets using ANSYS Fluent software. This simulation is based on the information of a reference article "Eulerian–Lagrangian modeling and computational fluid dynamics simulation of wire mesh demisters in MSF plants," and its results are compared and validated with the results in the article.

Price: $80

This problem simulates Erosion due to particle flow using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 14,029. In this project, the Erosion due to particle flow is simulated using the DPM How the particles flow and lead to the erosion of the solid surface has been well-modeled in this project.