Flow Regimes Online Courses
Here's every CFD online course related to Flow Regimes category.
Price: $72
The problem numerically simulates the Falling Objects into Water using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 8727. We perform this simulation as unsteady (Transient). We use Dynamic Mesh to apply mesh changes over time. A UDF is used to define cubes' motion toward the water surface. We use the VOF Multi-Phase model to define water and air.
Price: $60
The problem numerically simulates the combustion of methane and air in a combustion chamber using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 384112. We use the Species Transport model to define a chemical reaction. We use the Discrete Ordinate (DO) to define the Radiation model.
Price: $54
This simulation is based on the information of a reference article "Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics" and its results are compared and validated with the results in the article.
Price: $99
The problem numerically simulates Fish Cage Floating on Seawater using ANSYS Fluent software. This project is performed by the fluid-structure interaction (FSI) method. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4922130. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to consider grid changes over time. We apply the System Coupling to communicate between Fluent and Transient Structural software. We use the VOF Multi-Phase model to define the two-phase flow, including water and air.
Nanofluid Porous Mixer for Increasing Heat Transfer
Beginner, Intermediate
Price: $40
The problem numerically simulates the Porous Mixer for Increasing the Heat Transfer of Nanofluid using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software, and then mesh the model by ANSYS Meshing software. The Nanofluid is modeled as a single-phase fluid with modified thermophysical properties. We use the Porous option in the cell zone conditions.
Electric Field Effect on Nanofluid Heat Transfer (EHD)
Intermediate, Advanced
Price: $42
In this project, nanofluid flows in a bumpy channel in presence of an applied electrical potential.
Magnetic Field (MHD) Effect on Nanofluid Heat Transfer, 3-D
Intermediate, Advanced
Price: $54
In this project, nanofluid flows in a solid aluminum channel in the presence of an applied magnetic field.
Price: $32
The present project's results are compared with the experimental results of the paper “Midspan Flow-Field Measurements for Two Transonic Linear Turbine Cascades at Off-Design Conditions”. Turbulence modeling and Computational procedures (boundary conditions, etc.) are simulated based on the article “Numerical study of the flow field through a transonic linear turbine cascade at design and off-design conditions”.
Spillway (Wide-Edge) with Lateral Slope, Two-Phase Flow, ANSYS Fluent
Beginner, Intermediate
Price: $28
In this analysis, the flow inside a wide-edge spillway is investigated.