Mechanical Online Courses

Price: $4

Introduction of different mesh morphing methods Introduction and overview of the design tab of ANSYS Fluent software Post-processing of adjoint solution, specifically sensitivity analysis

Price: $42

In this project, a flow around a Contra-Rotating Turbine has been simulated, and the results of this simulation have been investigated. This ANSYS Fluent CFD training simulates a contra-rotating VAWT turbine with two blade rows rotating oppositely at 14.7 rad/s. Inlet velocity is 5.3 m/s; mesh motion defines rotations using k-epsilon model and steady pressure-based solver. Results show enhanced pressure/velocity between blades, doubling torque (~1.9 N.m per row) for better power.

Price: $54

The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821. The MRF method is used to rotate the turbine. FSI model analyses total strain, and stress over the turbine.

Price: $80

The problem numerically simulates the Von Kármán effect behind a cylinder using ANSYS CFX software. The geometry is designed in a 2.5D model with the Design Modeler software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 77,262. Body of Influence option is used to create smaller elements around the cylinder. The Transient and Steady form of the solution is performed.

Price: $4

Discrete Phase Model Dialog Box: interaction, particle treatment, tracking Physical Models: DEM, Breakup, Coalescence, etc Injection Dialog box: injection type, particle type, diameter distribution, etc Drag Laws: spherical, non-spherical, stokes-cunningham, etc Breakup Models: TAB, Wave DPM Boundary Conditions: Trap, reflect, wall-film, etc

Price: $48

The Design Modeler software is used to create the geometry. A structure grid is generated via ANSYS Meshing software. The discrete Phase Model (DPM) is used to model sand particles and erosion/accretion.

Price: $330

The problem numerically simulates Darrieus vertical axis wind turbine using ANSYS Fluent software. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the power coefficient. We use the Sliding Mesh model to rotate the rotor of the wind turbine.

Price: $48

The problem numerically simulates a Multi-Stage Axial Compressor using ANSYS Fluent software. We design the 3-D model with the ANSYS Blade Gen. The meshing of the present model has been generated by TurboGrid software and the total cell number is 11,430 elements. The compressor motion has been modeled with the MRF method. The Turbo Workflow module was used to model the Compressor.

Price: Free

Introduction and overview of the combustion Introduction to different combustion applications Summary of different fast and finite rate chemistry models implemented in ANSYS Fluent Physics of combustion o Premixed combustion o Non-premixed combustion o Partially premixed combustion