MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: $36
The problem numerically simulates the Darrieus Vertical Axis Water Turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 7422668. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define the change of meshing around the rotating turbine blades. We define a Rigid Body by a rotational motion with one degree of freedom (1-DOF).
Self-Propelled Submarine Motion, Dynamic Mesh (6-DOF)
Intermediate, Advanced
Price: $99
The problem numerically simulates Self-Propelled Submarine Motion using ANSYS Fluent software. We design the 3-D model with the CATIA software. We Mesh the model with ICEM software, and the element number equals 2802219. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to define grid changes. We use a UDF to define the movement as a Rigid Body. We use the VOF Multi-phase model to consider water and air.
Nanofluid Porous Mixer for Increasing Heat Transfer
Beginner, Intermediate
Price: $40
The problem numerically simulates the Porous Mixer for Increasing the Heat Transfer of Nanofluid using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software, and then mesh the model by ANSYS Meshing software. The Nanofluid is modeled as a single-phase fluid with modified thermophysical properties. We use the Porous option in the cell zone conditions.
Electric Field Effect on Nanofluid Heat Transfer (EHD)
Intermediate, Advanced
Price: $42
In this project, nanofluid flows in a bumpy channel in presence of an applied electrical potential.
Submarine Movement in Water by Dynamic Mesh (1-DOF)
Intermediate, Advanced
Price: $99
The problem numerically simulates the Submarine Movement in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 316846. We define the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the rotational movement. We define a rigid body by considering one degree of freedom. We use the VOF Multi-phase model to define water and air.
Magnetic Field (MHD) Effect on Nanofluid Heat Transfer, 3-D
Intermediate, Advanced
Price: $54
In this project, nanofluid flows in a solid aluminum channel in the presence of an applied magnetic field.
Floating Vessel Motion in Water by Dynamic Mesh, ANSYS Fluent Training
Intermediate, Advanced
Price: $60
The problem numerically simulates the Floating Vessel Motion in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 902808. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the motion with two degrees of freedom. We use the VOF Multiphase model and the Open Channel condition to define the water level inside the air.
FCC Riser Gas-Solid Separation System Simulation
Intermediate
Price: $48
The present problem simulates gas-solid flow within a fluid catalytic cracking (FCC) system using ANSYS Fluent software.
Price: $28
The problem numerically simulates the Sound Generation on Airfoil using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 231840. This project has been done in three modes with different angles of attack for airfoils. We use the Broadband Noise Sources model to define the Acoustic model.