MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: Free
In this project, a 3D CFD simulation of a 4-layer planar heat exchanger is investigated.
Price: $20
The problem numerically simulates the release of coronavirus particles from a patient's mouth while talking using ANSYS Fluent software. This project investigates the effect of a shield on preventing transmission of the virus particles to another person. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the DPM to study virus particles Discretely in a continuously fluid space. We use a Profile for particle velocity and mass flow rate.
Price: Free
The problem numerically simulates the conjugate heat transfer of airflow in a simplified 4-story wind tower using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 6375. The Boussinesq model is used to apply the air density changes due to temperature change.
Price: $20
The problem numerically simulates Talking Spread COVID-19 using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define particle virus dispersion. We use a Profile to define virus particles' velocity and mass flow rate.
Price: Free
In this project, the heat transfer process on a rough surface having small serrated fringes is analyzed and simulated.
Vertical Axis Wind Turbine (VAWT): Paper Numerical Validation
Beginner, Intermediate, Advanced
Price: $320
This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.
Price: $8
The heat transfer inside a double pipe heat exchanger with dish-shaped strip inserts is investigated in this project.
Price: $72
The problem numerically simulates virus particles' release from a patient's mouth inside a bank using ANSYS Fluent software. This project is performed in two modes: with and without the plastic cover. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1570219 and 1618366, respectively. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define virus particles dispersed from the mouth. We define an Injection as the Droplet which is evaporated. We use the Species Transport model to define evaporating gas species.
Nanofluid and Twisted Tape Inserts in a Tube, Validation
Beginner, Intermediate
Price: $72
The problem numerically simulates the Al2O3-Water Nanofluid in a Tube with Twisted Tape Inserts using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2148662. We define Nanofluid with two methods, including the Multiphase model and fluid properties. This simulation is validated with a reference article.