MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Helicopter CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $20
The problem numerically simulates the Helicopter using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 937677. We perform this simulation as unsteady (Transient). The Mesh Motion option is used to define the rotating motion of helicopter blades.
Hydraulic Jump of Water in Rectangular Channel, ANSYS Fluent Training
Beginner, Intermediate
Price: $20
In this project, hydraulic jump of water flow in a rectangular channel is analyzed.
Price: Free
The problem numerically simulates the airflow over a ventilated air cavity using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 803616. We aim to study Drag force in this project.
Wire Mesh Demister (DDPM), Paper Numerical Validation, ANSYS Fluent CFD Training
Intermediate, Advanced
Price: $280
The present problem simulates the flow of water vapor passing through a demister containing saline water droplets using ANSYS Fluent software. This simulation is based on the information of a reference article "Eulerian–Lagrangian modeling and computational fluid dynamics simulation of wire mesh demisters in MSF plants," and its results are compared and validated with the results in the article.
Price: Free
The problem numerically simulates the Flap Effect on the Trailing Edge of an Airfoil using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 64731. We aim to study Drag and Lift forces in this project.
Manifold of Engine CFD Simulation by Species Transport
Beginner, Intermediate
Price: $16
In this project, steady air flow mixing with fuel is investigated in an engine manifold with 3 outlets, where only one outlet is open and the other 2 outlets are blocked.
H-Type Vertical Axis Wind Turbine (VAWT): Mesh Motion
Beginner, Intermediate, Advanced
Price: $28
This project uses ANSYS Fluent to numerically simulate an H-type vertical axis wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,546,624. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational movement.
Series Fans CFD Simulation using MRF Method
Intermediate
Price: $24
The problem numerically simulates the airflow between two 3-bladed Series Fans using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1914000. We use the Frame Motion to define rotational motion for fan blades.
Price: $54
This simulation is based on the information of a reference article "Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics" and its results are compared and validated with the results in the article.