CFD Intermediate Courses
Here's every CFD online course in the Intermediate level.
Asthma Spray Inhaler Injection into the Lung, Ansys Fluent Training
Intermediate, Advanced
Price: $16
The problem numerically simulates Asthma Spray Inhaler Injection Into the Lung using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3734234. We perform this simulation as unsteady (Transient). We use the Discrete Phase Model (DPM) to define Asthma spray injection into the lung.
Spray Drying Chamber CFD Simulation by Ansys Fluent
Intermediate
Price: $220
In this project, Spray Drying Chamber has been simulated and the results of this simulation have been investigated.
Gas Particle Movement Through the Nozzle Simulation
Intermediate
Price: $30
In this project, gas-particles movement through the convergence-divergence nozzle has been simulated and the results of this simulation have been investigated.
Price: $80
In this project, erosion in the bent pipe has been simulated and the results of this simulation have been investigated.
Dust Particles Entering the Room, Ansys Fluent Training
Beginner, Intermediate
Price: $16
The problem numerically simulates the Dust Particles Entering the Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 42061. We use the Discrete Phase Model (DPM) to study the sedimentation of dust particles.
Wind Driven Rain (1-way Vs. 2-way) DPM, Ansys Fluent CFD Simulation Training
Intermediate, Advanced
Price: $100
In this project, wind-driven rain has been simulated, and the results of this simulation have been investigated.
Price: $100
In this project, water droplet falling on resident water has been simulated and the results of this simulation have been investigated.
Price: $20
The problem numerically simulates Sludge Flow Settling in a Pipe using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 390742. We use the Eulerian Multi-Phase model to define the sludge particles float on the water flow.
Sedimentation and Erosion in a Shell and Tube, Ansys Fluent CFD Simulation Training
Intermediate, Advanced
Price: $140
The problem numerically simulates Sedimentation and Erosion in a Shell and Tube Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 640618. We perform this simulation as unsteady (Transient). We use Discrete Phase Model (DPM) to define Sand Injection inside the heat exchanger. We aim to predict the Erosion Effect by different methods: Finnie, Oka, and Mclaury.