CFD Intermediate Courses

Price: $8

In this project, the unsteady cooling process of a hot rotating steel structure is investigated.

Price: $16

The problem numerically simulates a double-skin facade using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 490725. We define the Ideal Gas option for air density to consider the buoyancy effect. We define a Heat Source for the glass part.

Price: $20

The problem numerically simulates the release of coronavirus particles from a patient's mouth while talking using ANSYS Fluent software. This project investigates the effect of a shield on preventing transmission of the virus particles to another person. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the DPM to study virus particles Discretely in a continuously fluid space. We use a Profile for particle velocity and mass flow rate.

Price: $20

The problem numerically simulates Talking Spread COVID-19 using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 724076. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define particle virus dispersion. We use a Profile to define virus particles' velocity and mass flow rate.

Price: $320

This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.

Price: $72

The problem numerically simulates virus particles' release from a patient's mouth inside a bank using ANSYS Fluent software. This project is performed in two modes: with and without the plastic cover. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1570219 and 1618366, respectively. We perform this simulation as unsteady (Transient). We use the discrete phase model (DPM) to define virus particles dispersed from the mouth. We define an Injection as the Droplet which is evaporated. We use the Species Transport model to define evaporating gas species.

Price: $72

The problem numerically simulates the Al2O3-Water Nanofluid in a Tube with Twisted Tape Inserts using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2148662. We define Nanofluid with two methods, including the Multiphase model and fluid properties. This simulation is validated with a reference article.

Price: $200

The problem numerically simulates the shell and tube heat exchanger with staggered baffles using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 8031342. This simulation is validated with a reference article.

Price: $210

The problem numerically simulates the Hydrocyclone with a Tangent-Circle Inlet using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 228517. This simulation is validated with a reference article. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define water and air.