CFD Intermediate Courses
Here's every CFD online course in the Intermediate level.
Hydraulic Jump of Water in Rectangular Channel, ANSYS Fluent Training
Beginner, Intermediate
Price: $20
In this project, hydraulic jump of water flow in a rectangular channel is analyzed.
Wire Mesh Demister (DDPM), Paper Numerical Validation, ANSYS Fluent CFD Training
Intermediate, Advanced
Price: $280
The present problem simulates the flow of water vapor passing through a demister containing saline water droplets using ANSYS Fluent software. This simulation is based on the information of a reference article "Eulerian–Lagrangian modeling and computational fluid dynamics simulation of wire mesh demisters in MSF plants," and its results are compared and validated with the results in the article.
Manifold of Engine CFD Simulation by Species Transport
Beginner, Intermediate
Price: $16
In this project, steady air flow mixing with fuel is investigated in an engine manifold with 3 outlets, where only one outlet is open and the other 2 outlets are blocked.
H-Type Vertical Axis Wind Turbine (VAWT): Mesh Motion
Beginner, Intermediate, Advanced
Price: $28
This project uses ANSYS Fluent to numerically simulate an H-type vertical axis wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,546,624. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational movement.
Series Fans CFD Simulation using MRF Method
Intermediate
Price: $24
The problem numerically simulates the airflow between two 3-bladed Series Fans using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1914000. We use the Frame Motion to define rotational motion for fan blades.
Price: $54
This simulation is based on the information of a reference article "Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics" and its results are compared and validated with the results in the article.
Fin Pipe Radiator, (CHT) Conjugated Heat Transfer CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $80
The problem numerically simulates the Fin Pipe Radiator using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 290250. We perform the Conjugate Heat Transfer analysis for a radiator.
FSI Analysis of Airflow around an Airfoil Vibration
Intermediate
Price: $54
The problem numerically simulates the airflow around an airfoil using ANSYS Fluent software. This project is performed by the fluid-structure interaction (FSI) method. We design the 2-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 56220. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh method to consider grid changes over time. We apply the System Coupling to communicate between Fluent and Transient Structural software. We use the Density-based solver to consider compressible flow. We use a UDF to determine variable velocity and attack angle.
Price: $36
The problem numerically simulates the Darrieus Vertical Axis Water Turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 7422668. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define the change of meshing around the rotating turbine blades. We define a Rigid Body by a rotational motion with one degree of freedom (1-DOF).