Engineering Fields Online Courses
Here's every CFD online course related to Engineering Fields category.
Aorta, Non-Newtonian pulsating blood flow
Intermediate
Price: $42
The problem numerically simulates a non-Newtonian pulsating blood flow in Aorta using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software, and the element number equals 457864. We perform this simulation as unsteady (Transient). We use a UDF to define the pulsating inlet velocity to Aorta. We use the Carreau model to define a non-Newtonian fluid.
Price: $360
The problem numerically simulates Population Balance Model (PBM) for Nucleation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 112077. We use the Species Transport model to define a mixture of water, calcium, and oxalate as the initial phase. We use the Eulerian Multiphase model to define a two-phase flow, in which the secondary phase is calcium-oxalate, resulting from a chemical reaction. We use The population balance model (PBM) to study produced particles' behavior and predict the density or population of particles in specific sizes. We use a UDF function to define the nucleation and growth rates in PBM analysis.
Conjugated Heat Transfer, Elliptical Finned Tube Heat Exchanger Vs. Circular Fin
Beginner, Intermediate
Price: $160
In this project, by investigating conjugated heat transfer, the effect of cross-sectional change (with the constant area) on the rate of improvement of heat flux passing through the circular and elliptical finned tube heat exchanger was compared.
Accumulation of Particles in Elbow Bend by DDPM
Intermediate, Advanced
Price: $210
The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.
Single Slope Solar Still, Paper Numerical Validation, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $520
The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.
Price: $30
In this study, using the DPM (Discrete phase material) method, the effect of impurities in the working fluid on the splitter erosion was investigated.
Price: $21
The present problem simulates the movement of a submarine robot inside a canal containing water flow using ANSYS Fluent software.
Price: $28
The problem simulates a two-phase flow (water and air) inside an open channel with a 180-degree arc using ANSYS Fluent software.
Price: $24
The problem numerically simulates solar radiation at different hours using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 2054294. This study is performed based on the geographical characteristics of Baku (The capital of Azerbaijan) at 8 AM and 3 PM on June 21st. We perform this simulation as unsteady (Transient). We use Discrete Ordinate Radiation (DO) and Solar Ray Tracing to consider radiation heat transfer.