Fluent Modules Online Courses
Here's every CFD online course related to Fluent Modules category.
Radiant Floor Heating System, Paper CFD Validation
Intermediate
Price: $280
The problem numerically simulates Radiant Floor Heating System using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ICEM software, and the element number equals 640618. We use the Discrete Ordinates (DO) model to consider radiation heat transfer.
Price: $360
The problem numerically simulates Population Balance Model (PBM) for Nucleation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 112077. We use the Species Transport model to define a mixture of water, calcium, and oxalate as the initial phase. We use the Eulerian Multiphase model to define a two-phase flow, in which the secondary phase is calcium-oxalate, resulting from a chemical reaction. We use The population balance model (PBM) to study produced particles' behavior and predict the density or population of particles in specific sizes. We use a UDF function to define the nucleation and growth rates in PBM analysis.
Accumulation of Particles in Elbow Bend by DDPM
Intermediate, Advanced
Price: $210
The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.
Single Slope Solar Still, Paper Numerical Validation, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $520
The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.
Price: $30
In this study, using the DPM (Discrete phase material) method, the effect of impurities in the working fluid on the splitter erosion was investigated.
Price: $21
The present problem simulates the movement of a submarine robot inside a canal containing water flow using ANSYS Fluent software.
Price: $28
The problem simulates a two-phase flow (water and air) inside an open channel with a 180-degree arc using ANSYS Fluent software.
Price: $24
The problem numerically simulates solar radiation at different hours using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 2054294. This study is performed based on the geographical characteristics of Baku (The capital of Azerbaijan) at 8 AM and 3 PM on June 21st. We perform this simulation as unsteady (Transient). We use Discrete Ordinate Radiation (DO) and Solar Ray Tracing to consider radiation heat transfer.
Price: $140
In this research, using species transport module, the gases from combustion in the car engine and their interaction with the open air in the urban environment were investigated statically and in traffic mode.